Enhanced electrochemical corrosion resistance of 316L stainless steel manufactured by ultrasonic rolling assisted laser directed energy deposition

被引：0

作者：

Guan Liu ^{[1
]}

Yigui Su ^{[1
]}

Xuyu Pi ^{[1
]}

Dongxu Wen ^{[2
]}

Defu Liu ^{[1
]}

Yongcheng Lin ^{[1
]}

机构：

[1] School of Mechanical and Electrical Engineering, Central South University

[2] State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and

来源：

China Foundry | 2025年 / 22卷 / 02期

关键词：

D O I：

暂无

中图分类号：

TG142.71 [不锈钢、耐酸钢]; TG335 [轧制工艺]; TG665 [光能加工设备及其加工];

学科分类号：

摘要：

Under the laser directed energy deposition (LDED) process,the rapid melting and solidification usually lead to the emergence of pores and coarse columnar dendrites,which in turn compromise the properties of the deposited alloys.This study introduced in-situ ultrasonic rolling (UR) as an innovative method to enhance the corrosion resistance of LDED specimens,and the microstructural characteristics and their correlation with corrosion resistance were deeply investigated.The findings reveal that the LDED-UR specimen exhibits a reduction in both the fraction and size of pores.Under the influence of severe plastic deformation generated by LDED-UR process,fully equiaxed grains appear with a reduced average size of 28.61μm (compared to63.98μm for the LDED specimen with columnar grains).The electrochemical corrosion resistance of the LDED-UR specimen is significantly enhanced compared to the LDED specimen.This enhanced corrosion resistance can be attributed to the low fraction of small-sized pores,the fine and uniformly distributed Cr-enriched ferrite phase,and the formation of a compact and thick passive film due to dense grain boundaries.The insight of the correlation between microstructure and corrosion behavior opens up a new pathway to enhance the corrosion resistance of LDED specimens.

引用

页码：182 / 194

页数：13

共 50 条

[1] Enhanced electrochemical corrosion resistance of 316L stainless steel manufactured by ultrasonic rolling assisted laser directed energy deposition [J].

Liu, Guan ;

Su, Yi-gui ;

Pi, Xu-yu ;

Wen, Dong-xu ;

Liu, De-fu ;

Lin, Yong-cheng .

CHINA FOUNDRY, 2024, :182-194

[2] Enhanced corrosion resistance of laser additive manufactured 316L stainless steel by ultrasonic surface rolling process [J].

Xu, Qingzhong ;

Jiang, Dewen ;

Zhou, Jian ;

Qiu, Zhihao ;

Yang, Xiao .

SURFACE & COATINGS TECHNOLOGY, 2023, 454

[3] Laser Directed Energy Deposition of Bulk 316L Stainless Steel [J].

Ascari A. ;

Lutey A.H.A. ;

Liverani E. ;

Fortunato A. .

Ascari, Alessandro (a.ascari@unibo.it), 1600, Springer (07) :426-448

[4] Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel [J].

Jason R. Trelewicz ;

Gary P. Halada ;

Olivia K. Donaldson ;

Guha Manogharan .

JOM, 2016, 68 :850-859

[5] Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel [J].

Trelewicz, Jason R. ;

Halada, Gary P. ;

Donaldson, Olivia K. ;

Manogharan, Guha .

JOM, 2016, 68 (03) :850-859

[6] Achieving high strength 316L stainless steel by laser directed energy deposition-ultrasonic rolling hybrid process [J].

Liu, Guan ;

Su, Yigui ;

Pi, Xuyu ;

Xin, Siwei ;

Li, Kun ;

Liu, Defu ;

Lin, Y. C. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 903

[7] Corrosion Resistance Measurement of 316L Stainless Steel Manufactured by Selective Laser Melting [J].

Guzman-Nogales, Rigoberto ;

Estupinan-Lopez, Francisco ;

Gaona-Tiburcio, Citlalli ;

Lopez-Botello, Omar E. ;

Ramirez-Rodriguez, Juan G. ;

Zambrano-Robledo, Patricia C. .

MATERIALS, 2021, 14 (16)

[8] Fatigue Strength Improvement of Laser-Directed Energy Deposition 316L Stainless Steel with In Situ Ultrasonic Rolling by Preliminary Investigation [J].

Liu, Guan ;

Su, Yigui ;

Pi, Xuyu ;

Liu, Defu ;

Lin, Yongcheng .

MATERIALS, 2024, 17 (15)

[9] Microstructural banding of directed energy deposition-additively manufactured 316L stainless steel [J].

Yoon Hwa ;

Christopher S.Kumai ;

Thomas M.Devine ;

Nancy Yang ;

Joshua K.Yee ;

Ryan Hardwick ;

Kai Burgmann .

Journal of Materials Science & Technology, 2021, 69 (10) :96-105

[10] Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment [J].

Zhou, Chengshuang ;

Wang, Jing ;

Hu, Shiyin ;

Tao, Huimin ;

Fang, Bei ;

Li, Long ;

Zheng, Jinyang ;

Zhang, Lin .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2020, 167 (14)

← 1 2 3 4 5 →