Wall Interference during Testing a Blunt Body in a Transonic Flow

被引：0
作者：
S. A. Glazkov [1 ]
A. A. Ershov [1 ]
A. V. Semenov [1 ]
M. V. Mikhailov [2 ]
机构：
[1] Zhukovsky Central Aerohydrodynamic Institute, Moscow oblast, Zhukovsky
[2] Korolev Rocket and Space Corporation “Energia”, Korolyov
来源：
Mathematical Models and Computer Simulations | 2024年 / 16卷 / 6期
关键词：
coefficient of porosity; porous walls; transonic flow; wall interference;
D O I：
10.1134/S2070048224700431
中图分类号：
学科分类号：
摘要：
Abstract: This paper presents the results of numerical simulation of a transonic flow around a blunt body at a zero angle of attack in a test section with porous walls of the T-128 wind tunnel (WT) (Russia, Central Aerohydrodynamic Institute (TsAGI)). The calculations are performed using the EWT-128 TsAGI software package, which uses Darcy-type boundary conditions on the walls of the test section, whose porosity coefficient depends on the direction of the gas flow through the perforated surface. A comparison is made of the calculated and experimental drag coefficients of the model, as well as distributions of the isentropic Mach number on the model and on the perforated walls of the test section of the WT. A method is proposed for determining the correction to the Mach number of the oncoming flow to eliminate the wall interference of the test section in an aerodynamic experiment. The drag coefficients obtained as a result of calculations under WT conditions are corrected for the influence of the flow boundaries and compared with the free flow data. The calculated corrections are used to correct the experimental data. © Pleiades Publishing, Ltd. 2024.
引用
收藏
页码：814 / 825
页数：11
相关论文
共 23 条
  • [1] Glazkov S.A., Gorbushin A.R., Ivanov A.I., Semenov A.V., Recent experience in improving the accuracy of wall interference corrections in TsAGI T-128 wind tunnel, Prog. Aerosp. Sci, 37, pp. 263-298, (2001)
  • [2] Couch L., Brooks C., Effect of blockage ration on drag and pressure distributions for bodies of revolution at transonic speeds, NASA TN D-7331, (1973)
  • [3] Orvold D., Otto J., Simulation of Wind Tunnel Porosity Effects Using Hydraulic analogy,” in 13Th Aerospace Sciences Meeting, Pasadena, CA, 1975 (American Institute of Aeronautics and Astronautics, (1975)
  • [4] Davis J.W., “An empirical technique for optimization of variable porosity transonic wind tunnel flows,” MSc Thesis (Oklahoma State University, (1972)
  • [5] Binion T.W., An Investigation of Three-Dimensional Wall Interference in a Variable Porosity Transonic Wind Tunnel, Technical Report AEDC-TR-74-76 (Defense Technical Information Center, (1974)
  • [6] Grodzovskii G.L., Nikol'skii A.A., Svishchev G.P., Taganov G.I., Supersonic Gas Flows in Perforated Boundaries, (1967)
  • [7] Glazkov S.A., Gorbushin A.R., Semenov A.V., Experimental study of boundary conditions on the perforated walls of test sections no. 1 and 2 of T-128 transonic wind tunnel, AIP Conf. Proc., 2027, (2018)
  • [8] Neiland V.M., Optimal permittivity of aerodynamic tube walls at low supersonic velocities,” Izv. Akad. Nauk SSSR, Mekh. Zhidk. Gaza, No. 4, pp. 187-189, (1989)
  • [9] Glazkov S.A., Effect of the porosity parameter of perforated walls on the amplitude of the reflected disturbance in the vicinity of a model for supersonic flows, TsAGI Science Journal, 49, pp. 645-651, (2018)
  • [10] Chernyshev S.L., Yaneyland V., Bosnyakov S.M., Glazkov S.A., Gorbushin A.R., Vlasenko I.A.K.A., Experience in the Application of Numerical Methods to Tsagis Wind-Tunnel Testing techniques,” in 5Th Symp. on Integrating CFD and Experiments in Aerodynamics (Integr. 2012) (Tokyo, pp. 3-5, (2012)
123