Advancing Sustainable Compressed Earth Blocks Practices: A Critical Application of Simulation and Optimization in Reducing Energy Consumption and Greenhouse Emissions in Green Building

This study investigates the viability and benefits of utilizing compressed earth blocks (CEBs) as a sustainable construction material under varying climatic conditions, focusing on two cities in Saudi Arabia: Riyadh, representing a hot desert climate, and Abha, representing a cooler, high-altitude climate. A comprehensive simulation-based methodology was employed, which included energy performance modeling and optimization using EnergyPlus software, climate data analysis, environmental impact assessment, and cost analysis. To further verify the results, the EnergyPlus simulations were validated using a machine learning model, specifically the gradient boosting regressor (GBR), to ensure accuracy and reliability. The simulations demonstrate that CEBs provide substantial benefits in terms of structural performance, energy efficiency, and sustainability. For instance, CEB buildings showed reduced cooling loads by 35% in Riyadh and 25% in Abha, while also maintaining high indoor air quality and thermal comfort, leading to 80-85% occupant satisfaction. The use of CEBs contributed to significant reductions in carbon emissions, with 90% renewable materials, and proved to be cost-effective over the long term. The GBR validation confirmed less than 2% variation from the EnergyPlus simulations, further ensuring the reliability of the results. Environmental impact assessments revealed substantial reductions in carbon emissions, resource consumption, and waste generation through the adoption of CEBs. Although the initial cost of CEBs may be slightly higher than traditional materials, the long-term energy savings and reduced maintenance costs make them an economically viable option, particularly in regions with extreme climates. This study underscores the potential of CEBs as a versatile, efficient, and sustainable building material, offering significant benefits in energy efficiency, environmental impact reduction, cost-effectiveness, and occupant comfort-all based on robust simulation and modeling results.