Characterization of heavy metals migration from leachate-leaching municipal solid waste incineration bottom ash

被引：0

作者：

Tian, Tong ^{[1
]}

Huang, Yaji ^{[1
]}

Xiao, Yixuan ^{[1
]}

Cheng, Haoqiang ^{[1
]}

Pan, Hu ^{[1
]}

Zhou, Qi ^{[1
]}

Li, Zenghui ^{[1
]}

机构：

[1] Key Laboratory of Energy Thermal Conversion and Control, The Ministry of Education, Southeast University, Jiangsu, Nanjing

来源：

Huagong Jinzhan/Chemical Industry and Engineering Progress | 2024年 / 43卷 / 11期

关键词：

heavy metals; leachate; leaching toxicity; migration; municipal solid waste incinerated bottom ash;

D O I：

10.16085/j.issn.1000-6613.2023-1824

中图分类号：

学科分类号：

摘要：

Following the research idea of “waste treatment with waste”, to investigate the effects of leaching temperature (50—90℃) and leaching time (5—15min) on the migration characteristics of heavy metals (Zn, Ni, Cu, Pb, Ba and Cr), the test of leaching municipal solid waste incineration bottom ash (MSWI-BA) by leachate was conducted, and leaching toxicity of the bottom slag formed after leaching was analyzed to determine the best condition. It was found that MSWI-BA captured Ni, Zn, Pb, Cr and Ba within the leachate, while Cu was released from the MSWI-BA into the leachate. With the increase of leaching temperature, except Pb and Cr, the content of heavy metals in MSWI-BA tended to increase first and then decrease. With the increase of leaching time, each heavy metal showed different changing trends due to the changes of precipitation, adsorption, complexation, precipitation dissolution and other factors. Meanwhile, based on the results of leaching concentration and leaching rate of heavy metals, the toxicity of the bottom slag formed under different treatment conditions was relatively low, with leaching temperature of 70℃ and leaching time of 10min being the optimal operating condition. This paper provided a valuable reference on heavy metal migration control during the contact of MSWI-BA and leachate in real industrial processes. © 2024 Chemical Industry Press Co., Ltd.. All rights reserved.

引用

页码：6514 / 6523

页数：9

共 32 条

[1] ZARGAR Tasneem Imtiyaz, ALAM Pervez, KHAN Afzal Husain, Et al., Characterization of municipal solid waste: Measures towards management strategies using statistical analysis, Journal of Environmental Management, 342, (2023)
[2] AL-GHOUTI Mohammad A, KHAN Mariam, NASSER Mustafa S, Et al., Recent advances and applications of municipal solid wastes bottom and fly ashes: Insights into sustainable management and conservation of resources, Environmental Technology & Innovation, 21, (2021)
[3] ZHOU Hui, MENG Aihong, LONG Yanqiu, Et al., An overview of characteristics of municipal solid waste fuel in China: Physical, chemical composition and heating value, Renewable and Sustainable Energy Reviews, 36, pp. 107-122, (2014)
[4] ZHAO Xinyue, YANG Jinyan, NING Ning, Et al., Chemical stabilization of heavy metals in municipal solid waste incineration fly ash: A review, Environmental Science and Pollution Research International, 29, 27, pp. 40384-40402, (2022)
[5] DOU Xiaomin, REN Fei, NGUYEN Minh Quan, Et al., Review of MSWI bottom ash utilization from perspectives of collective characterization, treatment and existing application, Renewable and Sustainable Energy Reviews, 79, pp. 24-38, (2017)
[6] WONG Syieluing, MAH Angel Xin Yee, NORDIN Abu Hassan, Et al., Emerging trends in municipal solid waste incineration ashes research: A bibliometric analysis from 1994 to 2018, Environmental Science and Pollution Research, 27, 8, pp. 7757-7784, (2020)
[7] WANG Huan, ZHU Fenfen, LIU Xiaoyan, Et al., A mini-review of heavy metal recycling technologies for municipal solid waste incineration fly ash, Waste Management & Research, 39, 9, pp. 1135-1148, (2021)
[8] BACK Seungki, SAKANAKURA Hirofumi, Distribution of recoverable metal resources and harmful elements depending on particle size and density in municipal solid waste incineration bottom ash from dry discharge system, Waste Management, 126, pp. 652-663, (2021)
[9] JOELLE Kleib, GEORGES Aouad, NOR -EDINE Abriak, Et al., Production of Portland cement clinker from French municipal solid waste incineration bottom ash, Case Studies in Construction Materials, 15, (2021)
[10] YIN Ke, AHAMED Ashiq, LISAK Grzegorz, Environmental perspectives of recycling various combustion ashes in cement production—A review, Waste Management, 78, pp. 401-416, (2018)

← 1 2 3 4 →