Pre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes

被引:1
|
作者
Omar, Basma M. [1 ]
Zyadah, Mohamed A. [1 ]
Ali, Menna Y. [1 ]
El-Sonbati, Mervat A. [1 ]
机构
[1] Damietta Univ, Fac Sci, Environm Sci Dept, Dumyat 34517, Egypt
来源
SCIENTIFIC REPORTS | 2024年 / 14卷 / 01期
关键词
Multi-sourced industrial wastewater; Fenton process; Electro-Fenton process; Chemical oxygen demand; Biodegradability;
D O I
10.1038/s41598-024-78846-w
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The present study aims to characterize three industrial wastewater samples collected from petrochemical, food and beet sugar industries to determine the pollution potential and select the appropriate pre-treatment approach. According to the biodegradability profile of the multi-sourced mixed (composite) sample, the advanced oxidation process (AOPs) namely, Fenton (F) and Electro-Fenton (EF) were adopted as pre-treatment techniques and the operating parameters such as time, type of electrodes, pH, voltage, iron and H2O2 concentrations were critically examined. Analysis of Variance (ANOVA) was conducted to compare the performance efficiency of F& EF AOPs for treating the composite samples and the total operating costs for both approaches were assessed. The results revealed that, the initial values of the composite sample were 7.11, 19.2, 32.6, 19.3, 937, 1512, 860, 3.9, 2110 and 2.34 for pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, BOD, COD, Oil and grease (O&G), Total Phosphorous (TP), Total Suspended Solids (TSS) and Total Kjeldahl Nitrogen (TKN), respectively. In addition, EF process achieved more removal efficiency for COD, O&G, BOD, TSS, and TKN (84.3%, 69%, 85%, 72% and 71.27%) compared to Fenton which displayed 78.43%, 66%, 69%, 70.1%, and 61%, respectively. Moreover, there are statistically significant differences (p < 0.05) between the initial and final (pretreated) values of the composite industrial wastewater for the addressed parameters and EF was significantly (p < 0.05) more effective than F process. The total operating costs were 3.117 and 2.063$ for F and EF, respectively, which confirmed that EF is more efficient and cost effective than F process. It was concluded that electro-Fenton process is favorable, eco-friendly and cost-effective option for pretreating real complicated multi-sourced industrial wastewater. The present study demonstrated a new avenue for achieving efficient management of industrial wastewater generated from similar industries.
引用
收藏
页数:14
相关论文
共 50 条
  • [31] Towards industrial implementation of Electro-Fenton and derived technologies for wastewater treatment: A review
    Casado, Juan
    JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2019, 7 (01):
  • [32] Kinetics of aniline degradation by Fenton and electro-Fenton processes
    Anotai, Jin
    Lu, Ming-Chun
    Chewpreecha, Parichat
    WATER RESEARCH, 2006, 40 (09) : 1841 - 1847
  • [33] Efficient treatment for tannery wastewater through sequential electro-Fenton and electrocoagulation processes
    Rezgui, Soumaya
    Ghazouani, Mouna
    Bousselmi, Latifa
    Akrout, Hanene
    JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2022, 10 (03):
  • [34] Progress and prospect in electro-Fenton process for wastewater treatment
    Cheng-chun Jiang
    Jia-fa Zhang
    Journal of Zhejiang University-SCIENCE A, 2007, 8 : 1118 - 1125
  • [35] Minerals as catalysts of heterogeneous Electro-Fenton and derived processes for wastewater treatment: a review
    Casado, Juan
    ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, 2023, 30 (31) : 76405 - 76420
  • [36] Minerals as catalysts of heterogeneous Electro-Fenton and derived processes for wastewater treatment: a review
    Juan Casado
    Environmental Science and Pollution Research, 2023, 30 : 76405 - 76420
  • [37] Stabilized landfill leachate treatment using heterogeneous Fenton and electro-Fenton processes
    Sruthi, T.
    Gandhimathi, R.
    Ramesh, S. T.
    Nidheesh, P., V
    CHEMOSPHERE, 2018, 210 : 38 - 43
  • [38] Toxicity Reduction of Industrial and Municipal Wastewater by Advanced Oxidation Processes (Photo-Fenton, UVC/H2O2, Electro-Fenton and Galvanic Fenton): A Review
    Jose Rueda-Marquez, Juan
    Levchuk, Irina
    Manzano, Manuel
    Sillanpaa, Mika
    CATALYSTS, 2020, 10 (06)
  • [39] Treatment of Waste Sludge: A Comparison between Anodic Oxidation and Electro-Fenton Processes
    Godini, Kazem
    Azarian, Ghasem
    Rahmani, Ali Reza
    Zolghadrnasab, Hassan
    JOURNAL OF RESEARCH IN HEALTH SCIENCES, 2013, 13 (02) : 188 - 193
  • [40] Application of Photo-Fenton, Electro-Fenton, and Photo-Electro-Fenton processes for the treatment of DMSO and DMAC wastewaters
    Behrouzeh, Maryam
    Parivazh, Mohammad Mehdi
    Danesh, Elnaz
    Dianat, Mohammad Javad
    Abbasi, Mohsen
    Osfouri, Shahriar
    Rostami, Amir
    Sillanpaa, Mika
    Dibaj, Mahdieh
    Akrami, Mohammad
    ARABIAN JOURNAL OF CHEMISTRY, 2022, 15 (11)