Pre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes

被引:1
|
作者
Omar, Basma M. [1 ]
Zyadah, Mohamed A. [1 ]
Ali, Menna Y. [1 ]
El-Sonbati, Mervat A. [1 ]
机构
[1] Damietta Univ, Fac Sci, Environm Sci Dept, Dumyat 34517, Egypt
来源
SCIENTIFIC REPORTS | 2024年 / 14卷 / 01期
关键词
Multi-sourced industrial wastewater; Fenton process; Electro-Fenton process; Chemical oxygen demand; Biodegradability;
D O I
10.1038/s41598-024-78846-w
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The present study aims to characterize three industrial wastewater samples collected from petrochemical, food and beet sugar industries to determine the pollution potential and select the appropriate pre-treatment approach. According to the biodegradability profile of the multi-sourced mixed (composite) sample, the advanced oxidation process (AOPs) namely, Fenton (F) and Electro-Fenton (EF) were adopted as pre-treatment techniques and the operating parameters such as time, type of electrodes, pH, voltage, iron and H2O2 concentrations were critically examined. Analysis of Variance (ANOVA) was conducted to compare the performance efficiency of F& EF AOPs for treating the composite samples and the total operating costs for both approaches were assessed. The results revealed that, the initial values of the composite sample were 7.11, 19.2, 32.6, 19.3, 937, 1512, 860, 3.9, 2110 and 2.34 for pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, BOD, COD, Oil and grease (O&G), Total Phosphorous (TP), Total Suspended Solids (TSS) and Total Kjeldahl Nitrogen (TKN), respectively. In addition, EF process achieved more removal efficiency for COD, O&G, BOD, TSS, and TKN (84.3%, 69%, 85%, 72% and 71.27%) compared to Fenton which displayed 78.43%, 66%, 69%, 70.1%, and 61%, respectively. Moreover, there are statistically significant differences (p < 0.05) between the initial and final (pretreated) values of the composite industrial wastewater for the addressed parameters and EF was significantly (p < 0.05) more effective than F process. The total operating costs were 3.117 and 2.063$ for F and EF, respectively, which confirmed that EF is more efficient and cost effective than F process. It was concluded that electro-Fenton process is favorable, eco-friendly and cost-effective option for pretreating real complicated multi-sourced industrial wastewater. The present study demonstrated a new avenue for achieving efficient management of industrial wastewater generated from similar industries.
引用
收藏
页数:14
相关论文
共 50 条
  • [21] SACRIFICIAL ANODES CATALYZING ELECTRO-FENTON OXIDATION OF WASTEWATER
    Kocanova, V
    Dusek, L.
    Novotny, L.
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON CHEMICAL TECHNOLOGY, 2015, : 359 - 364
  • [22] EFFICIENCY IN ELECTRO-FENTON OXIDATION OF CTMP PULPING WASTEWATER
    Zhao, Qiang
    Zhang, Xueming
    Sun, Dezhi
    Jin, Xiaojuan
    Wang, Zhaohong
    CELLULOSE CHEMISTRY AND TECHNOLOGY, 2018, 52 (9-10): : 921 - 930
  • [23] Oxidation of 2,6-dimethylaniline by the Fenton, electro-Fenton and photoelectro-Fenton processes
    Ting, Wang-Ping
    Huang, Yao-Hui
    Lu, Ming-Chun
    JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING, 2011, 46 (10): : 1085 - 1091
  • [24] Pretreatment of furfural industrial wastewater by Fenton, electro-Fenton and Fe(II)-activated peroxydisulfate processes: a comparative study
    Yang, C. W.
    Wang, D.
    Tang, Q.
    WATER SCIENCE AND TECHNOLOGY, 2014, 70 (03) : 414 - 421
  • [25] Anodic oxidation and electro-Fenton treatment of rotenone
    Dhaouadi, Anissa
    Monser, Lotfi
    Adhoum, Nafaa
    ELECTROCHIMICA ACTA, 2009, 54 (19) : 4473 - 4480
  • [26] Modeling and optimizing Fenton and electro-Fenton processes for dairy wastewater treatment using response surface methodology
    Akkaya, G. K.
    Erkan, H. S.
    Sekman, E.
    Top, S.
    Karaman, H.
    Bilgili, M. S.
    Engin, G. O.
    INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2019, 16 (05) : 2343 - 2358
  • [27] Modeling and optimizing Fenton and electro-Fenton processes for dairy wastewater treatment using response surface methodology
    G. K. Akkaya
    H. S. Erkan
    E. Sekman
    S. Top
    H. Karaman
    M. S. Bilgili
    G. O. Engin
    International Journal of Environmental Science and Technology, 2019, 16 : 2343 - 2358
  • [28] Comparison of Aniline Oxidation by Electro-Fenton and Fluidized-Bed Fenton Processes
    Anotai, Jin
    Su, Chia-Chi
    Tsai, Yi-Chun
    Lu, Ming-Chun
    JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE, 2011, 137 (05): : 363 - 370
  • [29] Pre-treatment of industrial landfill leachate by fenton's oxidation
    Petruzzelli, D.
    Boghetich, G.
    Petrella, M.
    Dell'Erba, A.
    L'Abbate, P.
    Sanarica, S.
    Miraglia, M.
    GLOBAL NEST JOURNAL, 2007, 9 (01): : 51 - 56
  • [30] Chelate-modified Electro-Fenton process for mixed industrial wastewater treatment
    Varindani, Anand
    Singh, T. S. Anantha
    Menon, Poornima
    Nidheesh, P., V
    ENVIRONMENTAL TECHNOLOGY, 2022, 43 (22) : 3497 - 3506