Study of the Effect of Microgeometry Parameters of the Cutting Edge on Cutting Force, Wear, and Machinability during Milling

被引：0
作者：
A. S. Babaev [1 ]
V. N. Kozlov [1 ]
A. R. Semenov [1 ]
A. S. Shevchuk [1 ]
V. A. Ovcharenko [1 ]
机构：
[1] National Research Tomsk State University, Tomsk
来源：
Russian Engineering Research | 2024年 / 44卷 / 12期
基金：
俄罗斯科学基金会;
关键词：
cutting force; microgeometry of the cutting edge; milling; roughness; wear;
D O I：
10.3103/S1068798X24703271
中图分类号：
学科分类号：
摘要：
Abstract: The article considers milling of structural steels using a tool with rounded cutting edges and wear-resistant coating. The effectiveness of drag finishing of sharpened cutters with rounded edges and cutters with rounded edges and a PVD coating is assessed based on the cutting force and efficient tool life. © Allerton Press, Inc. 2024.
引用
收藏
页码：1756 / 1766
页数：10
相关论文
共 34 条
  • [21] Priarone P.C., Rizzuti S., Settineri L., Vergnano G., Effects of cutting angle, edge preparation, and nano-structured coating on milling performance of a gamma titanium aluminide, J. Mater. Process. Technol, 212, pp. 2619-2628, (2019)
  • [22] Lv D., Wang Y., Yu X., Effects of cutting edge radius on cutting force, tool wear, and life in milling of SUS-316L steel, Int. J. Adv. Manuf. Technol, 111, pp. 2833-2844, (2020)
  • [23] Lv D., Wang Y., Yu X., Analysis of abrasives on cutting edge preparation by drag finishing, Int. J. Adv. Manuf. Technol, 119, pp. 3583-3594, (2022)
  • [24] Melentiev R., Fang F., Narala S.K.R., Influence of different pretreatments on Ti–6Al–4V surface integrity and scratch-resistance of epoxy coating: Analysis of topography, microstructure, chemistry and wettability, Surf. Coat. Technol, 404, (2020)
  • [25] Puneet C., Valleti K., Gopal A.V., Influence of surface preparation on the tool life of cathodic arc PVD coated twist drills, J. Manuf. Processes, 27, pp. 233-240, (2017)
  • [26] Perez-Salinas C.F., Olmo A., Lacalle L.N.L., Estimation of drag finishing abrasive effect for cutting edge preparation in broaching tool, Materials, 15, (2022)
  • [27] Santana M.I., Luiz M.P., Effects of tool edge preparation on tool life in drilling of SAE4144M steel, Int. J. Precis. Eng. Manuf, 23, pp. 1113-1122, (2022)
  • [28] Kozlov V.N., Zhang J.Y., Cui J., Bogolyubova M.N., Split cutter method for contact stresses research over flank surface of a cutter, Key Eng. Mater, 743, pp. 258-263, (2017)
  • [29] Kozlov V.N., Zhang J.Y., Guo Y.B., Sabavath S.K., Research of contact stresses distribution on plunge-cutting into a steel workpiece, Key Eng. Mater, 769, pp. 284-289, (2018)
  • [30] Frankowski G., Chen M., Huth T., Real-time 3D shape measurement with digital stripe projection by Texas instruments Micro Mirror devices (DMD), Proc. SPIE, 3958, pp. 90-106, (2000)
1234