Study on the energy evolution process and damage constitutive model of concrete–granite composite specimens under uniaxial compression load

被引:0
作者
Zhuo Dong [1 ]
Yingxian Lang [2 ]
Bin Gong [3 ]
Ruifu Yuan [4 ]
Zhengzhao Liang [1 ]
Shanyong Wang [2 ]
Chun’an Tang [3 ]
机构
[1] School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo
[2] State Collaborative Innovation Center of Coal Work Safety and Clean-Efficiency Utilization, Henan Polytechnic University, Jiaozuo
[3] State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Liaoning, Dalian
[4] Department of Civil and Environmental Engineering, Brunel University London, London
[5] Discipline of Civil, Surveying and Environmental Engineering, School of Engineering, The University of Newcastle, Callaghan
基金
中国国家自然科学基金;
关键词
Concrete–granite composite specimens; Energy evolution process; Mechanical properties; Piecewise damage constitutive model; Uniaxial compression;
D O I
10.1007/s40948-024-00910-6
中图分类号
学科分类号
摘要
The interaction between concrete structures and rock foundations is a crucial research topic for assessing safety and stability in geotechnical and underground engineering. The uniaxial compression tests were conducted on different combination modes (concrete component heights (Hc), interface inclination angle (β), and coarse aggregate contents) to investigate their impact on the mechanical and energy response of concrete–granite composite specimens (CGCSs). This study categorized three failure modes: only concrete component failure (Hc = 80 mm), shear failure along the interface (β = 30°), and simultaneous failure of both components (other combination modes). The fractal dimension (Df) of surface cracks positively correlates with Hc, while the compressive strength (σCGCS) and stiffness (ECGCS) exhibit an inverse trend. The value of Df and σCGCS both exhibit a ''U-shaped'' trend when β ranges from 0° to 90°, whereas the value of ECGCS decreases linearly. Moreover, The value of Df and ECGCS positively correlate with coarse aggregate contents, while the value of σCGCS trends vary non-monotonically increases. The coarse aggregate contents have few effects on energy conversion. Typical brittle failure (β = 0°, β = 30°, and Hc = 20 mm) and ductile failure (other combination modes) are observed. Energy evolution characteristics offer quantitative insight into the damage evolution processes of CGCSs. The piecewise damage constitutive model based on dissipation energy can accurately describe the mechanical response of CGCSs. This study enhances understanding of the mechanical properties, failure characteristics, and energy evolution process of CGCSs under complex combination modes. © The Author(s) 2024.
引用
收藏
相关论文
共 49 条
  • [1] Chang X., Guo T.F., Zhang S., Cracking behaviours of layered specimen with an interface crack in Brazilian tests, Eng Fract Mech, 228, (2020)
  • [2] Cui T., He H.X., Yan W.M., Zhou D.X., Compression damage constitutive model of hybrid fiber reinforced concrete and its experimental verification, Constr Build Mater, 264, (2020)
  • [3] Deng H.F., Hu A.L., Li J.L., Zhang X.J., Hu Y., Chang D.L., Zhu M., Statistical damage constitutive model of sandstone under water-rock interaction, Rock Soil Mech, 38, 3, pp. 631-639, (2017)
  • [4] Du X.H., Xue J.H., Shi Y., Cao C.R., Shu C.M., Li K.H., Ma Q., Zhan K.L., Chen Z.H., Wang S.L., Triaxial mechanical behaviour and energy conversion characteristics of deep coal bodies under confining pressure, Energy, 26, (2023)
  • [5] Feng Q., Xu J.S., Cai C.G., Liu W.W., Jin J.C., Han W.W., Qin Z., Damage constitutive model and meso-failure characteristics of freeze-thaw rock under triaxial compression, B Eng Geol Environ, 83, 4, (2024)
  • [6] Gao Z.L., Liu Z.B., Tian F., Shen W.Q., Strength, energy evolution and cracking process of sandstone under high-temperature and high-pressure coupled true triaxial compression, Geomech Geophys Geo-Energy Geo-Resour, 8, 6, (2022)
  • [7] Gong F.Q., Shi R.H., Xu L., Linear energy storage and dissipation laws of concrete under uniaxial compression at different ages, Constr Build Mater, 318, (2022)
  • [8] Gong H.L., Luo Y., Wei X.Q., Peng J.J., Li X.P., Investigations on dynamic failure behaviors and energy transfer efficiency of heat-treated high-performance concrete under multiaxial constraints, Constr Build Mater, 409, (2023)
  • [9] Gu X.L., Hong L., Wang Z.L., Lin F., Experimental study and application of mechanical properties for the interface between cobblestone aggregate and mortar in concrete, Constr Build Mater, 46, pp. 156-166, (2013)
  • [10] Gutierrez-Ch J.G., Senent S., Melentijevic S., Jimenez R., Distinct element method simulations of rock–concrete interfaces under different boundary conditions, Eng Geol, 240, pp. 123-139, (2018)