Effect of si content in Ti-Al-Ta-Si-N coatings on their fracture under uniaxial tension

被引：0
|
作者：
Kuzminov, E. D. [1 ]
Shugurov, A. R. [1 ]
Derbin, A. Yu. [1 ]
Panin, A. V. [1 ]
Dmitriev, A. I. [1 ]
机构：
[1] Russian Acad Sci, Siberian Branch, Inst Strength Phys & Mat Sci, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 11期
关键词：
Ti-Al-Ta-Si-N coatings; Magnetron sputtering; Nanocrystalline structure; Uniaxial tension; Adhesion; 538.975; 539.216.2; FILMS; HARD;
D O I：
10.1007/s11182-024-03345-4
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Effect of Si content on the patterns of deformation and fracture of Ti1-x-y-zAlxTaySizN coatings under uniaxial tension is investigated. The nanoindentation method has shown that the coating with z = 0.10 has the maximum hardness, which is caused by the formation of a thin grain-boundary amorphous SiNx phase. At the same time, the Ti0.35Al0.40Ta0.10Si0.15N coating showed the highest fracture resistance and adhesive strength. It is found that this effect is due to the suppression of the growth of columnar grains in this coating and the formation of a two-phase amorphous-nanocrystalline structure, which makes it difficult for cracks to propagate.
引用
收藏
页码：2056 / 2065
页数：10
相关论文
共 50 条
  • [1] The effect of Si content on microstructure and mechanical properties of Ti-Al-Ta-Si-N coatings
    Shugurov, A. R.
    Kuzminov, E. D.
    Garanin, Yu. A.
    Panin, A. V.
    Dmitriev, A. I.
    VACUUM, 2023, 216
  • [2] Multiscale Fracture of Ti-Al-N Coatings under Uniaxial Tension
    Shugurov, A. R.
    Panin, A. V.
    Dmitriev, A. I.
    Nikonov, A. Yu.
    PHYSICAL MESOMECHANICS, 2021, 24 (02) : 185 - 195
  • [3] Multiscale Fracture of Ti-Al-N Coatings under Uniaxial Tension
    A. R. Shugurov
    A. V. Panin
    A. I. Dmitriev
    A. Yu. Nikonov
    Physical Mesomechanics, 2021, 24 : 185 - 195
  • [4] Effect of N2 to total pressure ratio on the structure, mechanical and tribological properties of magnetron-sputtered Ti-Al-Ta-Si-N coatings
    Shugurov, A. R.
    Kuzminov, E. D.
    Derbin, A. Yu.
    Panin, A. V.
    Dmitriev, A. I.
    SURFACE & COATINGS TECHNOLOGY, 2024, 492
  • [5] The Effect of Multilayer Architecture and Ta Alloying on the Mechanical Performance of Ti-Al-N Coatings under Scratching and Uniaxial Tension
    Shugurov, Artur Rubinovich
    Kuzminov, Evgenii Dmitrievich
    METALS, 2021, 11 (08)
  • [6] Effect of the nanostructuring of a Cu substrate on the fracture of heat-resistant Si-Al-N coatings during uniaxial tension
    A. V. Panin
    A. R. Shugurov
    M. S. Kazachenok
    V. P. Sergeev
    Technical Physics, 2012, 57 : 779 - 786
  • [7] Improvement of Mechanical Properties and Adhesion of Ti-Al-Si-N Coatings by Alloying with Ta
    Shugurov, Artur R.
    Kuzminov, Evgenii D.
    Garanin, Yuriy A.
    Panin, Alexey, V
    Dmitriev, Andrey, I
    LUBRICANTS, 2022, 10 (08)
  • [8] Effect of Al content on microstructure and mechanical properties of Ti-Al-Si-N nanocomposite coatings
    Chen, Li
    DuA, Yong
    Wang, Ai J.
    Wang, She Q.
    Zhou, Shu Z.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04): : 718 - 721
  • [9] Wear behavior and thermal stability of HPPMS (Al,Ti,Cr,Si)ON, (Al,Ti,Cr,Si)N and (Ti,Al,Cr,Si)N coatings for cutting tools
    Bobzin, K.
    Broegelmann, T.
    Kruppe, N. C.
    Cadet, M.
    SURFACE & COATINGS TECHNOLOGY, 2020, 385
  • [10] Effect of Si content on the microstructure and mechanical properties of Mo-Al-Si-N coatings
    Yang, J. F.
    Prakash, B.
    Jiang, Y.
    Wang, X. P.
    Fang, Q. F.
    VACUUM, 2012, 86 (12) : 2010 - 2013
12345