Layered synthesis of billets by pulse MIG welding using austenitic flux-cored wire with nitrogen

被引：0

作者：

Smolentsev, A. S. ^{[1
,2
]}

Trushnikov, D. N. ^{[2
]}

Permyakov, G. L. ^{[2
]}

Veselova, V. E. ^{[3
]}

Votinova, E. B. ^{[1
,2
]}

机构：

[1] Ural Fed Univ, Ekaterinburg, Russia

[2] Perm Natl Res Polytech Univ, Perm, Russia

[3] Russian Acad Sci, Inst Engn Sci, Ural Branch, Ekaterinburg 620049, Russia

来源：

METALLURGIST | 2024年 / 68卷 / 08期

关键词：

Wire arc additive manufacturing; Flux cored wire; Nitrogen; Austenite; Layer-by-layer forging; 621.791.011;

D O I：

10.1007/s11015-024-01826-y

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The possibility of producing multilayer billets by wire arc additive manufacturing (WAAM) technology with layer-by-layer forging using Cr20Mn5Ni4Mo2.5Cu3N0.3 flux-cored wire of 1.6 mm diameter as electrode material is investigated. The applied method resulted in the production of a weld metal with austenitic-ferritic structure (delta F approximate to 1.5 vol %) without defects, which demonstrates a good combination of strength and plastic properties (sigma B = 960 MPa, sigma 0.2 = 670 MPa, delta = 35%).

引用

页码：1166 / 1174

页数：9

共 50 条

[1] An austenitic flux-cored wire for welding hardening steels
Weld Int, 2 (147):
[2] Layered synthesis of workpieces by mig-pulse surface method using austenitic metal-cored wire with nitrogen
Smolentsev, A. S.
Berezovsky, A. V.
Trushnikov, D. N.
Permyakov, G. L.
Veselova, V. E.
Shak, A. V.
Usoltsev, E. A.
METALLURGIST, 2024, 68 (01) : 118 - 128
[3] FLUX-CORED WIRE FOR WELDING OF STEEL
LEE, RH
WELDING JOURNAL, 1965, 44 (05) : 387 - &
[4] Flux-cored wire for underwater wet welding
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
不详
Hanjie Xuebao, 5 (13-16):
[5] SPECIAL FEATURES OF WELDING AUSTENITIC MANGANESE CAST-IRON WITH FLUX-CORED WIRE
METLITSKII, VA
PATSKEVICH, IR
TSISHEVSKII, GM
AUTOMATIC WELDING USSR, 1984, 37 (10): : 47 - 49
[6] Recent situation of flux-cored wire for MAG welding
Suga, Tetsuo
R and D: Research and Development Kobe Steel Engineering Reports, 1988, 38 (04): : 77 - 80
[7] MAG welding stainless steels with flux-cored wire
Aihara, T.
Welding Research Abroad, 1994, 40 (08): : 8 - 11
[8] Welding with Flux-Cored Wire Without External Shielding.
Cunat, P.J.
Soudage et Techniques Connexes, 1981, 35 (9-10): : 319 - 334
[9] The Spectral Analysis of TIG Welding Filled with Flux-Cored Wire
Liu Ying
Yang Li-jun
He Tian-Xi
Zhai Yong-lei
Liu Tong
SPECTROSCOPY AND SPECTRAL ANALYSIS, 2017, 37 (07) : 2171 - 2176
[10] MECHANIZED WELDING OF CAST-IRON WITH A FLUX-CORED WIRE
IVANOV, VG
POKIDOV, IT
LEVCHENKOV, VI
WELDING PRODUCTION, 1978, 25 (03): : 19 - 21

← 1 2 3 4 5 →