Gust alleviation and aeroacoustic characteristics of flexible morphing trailing edge airfoil

被引：0
作者：
Zhang, Yuming [1 ]
Dai, Yuting [1 ,2 ]
Huang, Guangjing [1 ]
Yang, Chao [1 ]
Jiang, Shujie [3 ]
机构：
[1] School of Aeronautic Science and Engineering, Beihang University, Beijing
[2] Tianmushan Laboratory, Hangzhou
[3] Laboratory of Aerodynamic Noise Control, China Aerodyamics Research and Development Center, Mianyang
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2024年 / 45卷 / 10期
关键词：
flexible morphing; FW-H equation; gust alleviation; large eddy simulation; tonal noise;
D O I：
10.7527/S1000-6893.2023.29219
中图分类号：
学科分类号：
摘要：
The seamless and smooth aerodynamic shape of the flexible morphing trailing edge not only offers significant improvements over traditional hinged rudders in aerodynamic performance，but also has the potential to enhance noise reduction capabilities. Using the large eddy simulation model and the acoustic analogy method based on the FWH equation，the aeroacoustic characteristics of the stitched and seamless trailing edges are investigated through CFD numerical simulation. Furthermore，the study explores the aeroacoustic characteristics of the aircraft when it encounters gusts，with a particular focus on the flexible morphing of the seamless trailing edge. The load alleviation efficiency and aeroacoustic characteristics of the flexible morphing of seamless trailing edge are compared with those of rigid deflection of the seamless trailing edge. The results show that at 4° angle of attack，the tonal noise peak of seamless trailing edge decreases by 20. 2 dB compared with that of slotted trailing edge With the sine wind gust of 4°-20° equivalent angle of attack，the load alleviation efficiency of flexible morphing trailing edge is more than 60%，which is 10% -30% higher than that in the rigid deflection. In addition，the tonal noise peak value of flexible morphing trailing edge can be reduced by 7. 2 dB compared with that of the rigid deflection at 12° equivalent angle sine gust. Finally，the effects of the two deflection modes of the seamless trailing edge on wind load alleviation efficiency and aeroacoustic characteristics are analyzed from the perspective of dynamic characteristics and flow evolution. © 2024 Chinese Society of Astronautics. All rights reserved.
引用
收藏
相关论文
共 28 条
  • [1] KAMLIYA JAWAHAR H, ALIHAN SHOWKAT ALI S, AZARPEYVAND M, Et al., Aerodynamic and aeroacoustic performance of high-lift airfoil fitted with slat cove fillers, Journal of Sound and Vibration, 479, (2020)
  • [2] QIAO W Y, TONG F, CHEN W J, Et al., Review on aerodynamic noise reduction with bionic configuration [J], Acta Aerodynamica Sinica, 36, 1, pp. 98-121, (2018)
  • [3] ZHU Z Q, LAN S L., Study of airframe noise and its reduction for commercial aircraft[J], Acta Aeronautica et Astronautica Sinica, 36, 2, pp. 406-421, (2015)
  • [4] DOBRZYNSKI W., Almost 40 years of airframe noise research:What did we achieve？[J], Journal of Aircraft, 47, 2, pp. 353-367, (2010)
  • [5] RIVERO A E, FOURNIER S, MANOLESOS M, Et al., Wind tunnel comparison of flapped and FishBAC camber variation for lift control:AIAA-2020-1300, (2020)
  • [6] VARTIO E, SHAW E, VETTER T., Gust load alleviation flight control system design for a SensorCraft vehicle:AIAA-2008-7192, (2008)
  • [7] WONG A, BIL C, MARINO M., Design and aerodynamic performance of a FishBAC morphing wing: AIAA-2022-1298, (2022)
  • [8] NGUYEN N, LEBOFSKY S, TING E, Et al., Development of variable camber continuous trailing edge flap for performance adaptive aeroelastic wing, SAE Aero-Tech Congress & Exhibition, (2015)
  • [9] NGUYEN N T, CRAMER N B, HASHEMI K E, Et al., Progress on gust load alleviation wind tunnel experiment and aeroservoelastic model validation for a flexible wing with variable camber continuous trailing edge flap system:AIAA-2020-0214, (2020)
  • [10] BROOKS T F, POPE D S, MARCOLINI M A., Airfoil self-noise and prediction, (1989)
123