Insulation optimization of liquid hydrogen storage tank using dynamic analysis

被引:0
作者
Li, Deming [1 ]
Liu, Haiyang [3 ]
Zhang, Chengbin [1 ]
Chen, Yongping [1 ,2 ]
机构
[1] School of Energy and Environment, Southeast University, Nanjing
[2] Key Laboratory of Efficient Low-Carbon Energy Conversion and Utilization of Jiangsu Provincial Higher Education Institutions, School of Environmental Science and Engineering, Suzhou University of Science and Technology, Suzhou
[3] Aerosun Corporation, Nanjing
基金
中国国家自然科学基金;
关键词
Liquid hydrogen; Multilayer insulation; Self-pressurization; Thermal insulation; Vapor-cooled shield;
D O I
10.1016/j.ijhydene.2025.02.263
中图分类号
学科分类号
摘要
Advanced insulation systems are critical for efficient liquid hydrogen storage and transportation. To enhance thermal insulation performance, this study proposes a thermal insulation system integrating vapor-cooled shield (VCS) driven by liquid nitrogen boil-off gas (BOG) with variable density multilayer insulation (VDMLI). Two VCS operation modes, Top-down and Bottom-up, are designed based on the BOG flow direction. A thermodynamic model for the insulation system and a self-pressurization model for the storage tank are developed to optimize the VCS position under constant-temperature boundary conditions, identifying the 23rd VDMLI layer as optimal. On this basis, the impact of VCS operation modes on tank self-pressurization and self-evaporation behaviors is further analyzed. The results indicated that liquid nitrogen BOG-driven VCS significantly improves thermal insulation, reducing heat flux density to 0.137 W/m2—59.3% lower than that of VDMLI alone (0.337 W/m2). Moreover, the Top-down mode exhibits superior thermal insulation performance across various scenarios due to its prioritization of cold shielding in the vapor zone. These findings provide theoretical and technical guidance for optimizing liquid hydrogen tank insulation systems. © 2025 Hydrogen Energy Publications LLC
引用
收藏
页码:588 / 597
页数:9
相关论文
共 41 条
  • [1] Yartys V.A., Lototskyy M.V., Akiba E., Albert R., Antonov V.E., Ares J.R., Et al., Magnesium based materials for hydrogen based energy storage: past, present and future, Int J Hydrogen Energy, 44, 15, pp. 7809-7859, (2019)
  • [2] Kang D.-H., An J.-H., Lee C.-J., Numerical modeling and optimization of thermal insulation for liquid hydrogen storage tanks, Energy (Calg), 291, (2024)
  • [3] Zainal B.S., Ker P.J., Mohamed H., Ong H.C., Fattah I.M.R., Rahman S.M.A., Et al., Recent advancement and assessment of green hydrogen production technologies, Renew Sustain Energy Rev, 189, (2024)
  • [4] Le T.T., Sharma P., Bora B.J., Tran V.D., Truong T.H., Le H.C., Et al., Fueling the future: a comprehensive review of hydrogen energy systems and their challenges, Int J Hydrogen Energy, 54, pp. 791-816, (2024)
  • [5] Ma N., Zhao W., Wang W., Li X., Zhou H., Large scale of green hydrogen storage: opportunities and challenges, Int J Hydrogen Energy, 50, pp. 379-396, (2024)
  • [6] Kourougianni F., Arsalis A., Olympios A.V., Yiasoumas G., Konstantinou C., Papanastasiou P., Et al., A comprehensive review of green hydrogen energy systems, Renew Energy, 231, (2024)
  • [7] Morales-Ospino R., Celzard A., Fierro V., Strategies to recover and minimize boil-off losses during liquid hydrogen storage, Renew Sustain Energy Rev, 182, (2023)
  • [8] Zhang T., Uratani J., Huang Y., Xu L., Griffiths S., Ding Y., Hydrogen liquefaction and storage: recent progress and perspectives, Renew Sustain Energy Rev, 176, (2023)
  • [9] Li H., Cao X., Liu Y., Shao Y., Nan Z., Teng L., Et al., Safety of hydrogen storage and transportation: an overview on mechanisms, techniques, and challenges, Energy Rep, 8, pp. 6258-6269, (2022)
  • [10] Mulky L., Srivastava S., Lakshmi T., Sandadi E.R., Gour S., Thomas N.A., Et al., An overview of hydrogen storage technologies – key challenges and opportunities, Mater Chem Phys, 325, (2024)