Characteristics analysis of gas solid two-phase flow in pneumatic conveying based on CFD-DEM algorithm

被引:0
|
作者
Yu Y. [1 ]
Shi B. [1 ]
Meng H. [2 ]
Ding P. [1 ]
Yao Y. [1 ]
机构
[1] School of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Liaoning, Shenyang
[2] College of New Energy, China University of Petroleum (East China), Shandong, Qingdao
关键词
CFD-DEM coupling method; dilute phase swirl pneumatic conveying; flow characteristic; granular flow; multiphase flow; static mixer;
D O I
10.16085/j.issn.1000-6613.2023-0353
中图分类号
学科分类号
摘要
Because of its light weight, ultra-light powder particles are easily disturbed by airflow in the process of transportation, and the pipeline pneumatic conveying process of material is unstable and prone to blockage. To study the gas-solid two-phase flow characteristics of ultra-light powder particles in cyclone pneumatic conveying, computational fluid dynamics and discrete element method (CFD-DEM) were used to simulate the gas-solid two-phase flow characteristics in Komax static mixer. It was found that the horizontal pipe with Komax elements can change the particles flow state, and improve the accumulation and uneven distribution of particles. From the analysis of the flow state of particle phase and fluid phase, it was concluded that the element aspect ratio Ar=3 was the preferred geometry structure. Through the range analysis of orthogonal experiments, the order of factors affecting gas-solid two-phase flow characteristics was obtained as follows: conveying gas velocity > particle mass flow rate > particle size. When the element aspect ratio Ar was 3, the collision frequency and strength of particle-particle and particle-wall were negatively correlated. Combining with the dispersion state of the particle flow at the outlet, the optimal conveying gas velocity was 3—4m/s. Considering the influence of conveying gas velocity on pressure drop in the pipeline, the empirical fitting formula of pressure drop, conveying gas velocity and axial position during pneumatic transportation of horizontal pipeline with Komax element was proposed. © 2024 Chemical Industry Press Co., Ltd.. All rights reserved.
引用
收藏
页码:1133 / 1144
页数:11
相关论文
共 43 条
  • [1] ZHOU Jiawei, JING Shuangxi, LIU Yu, Design and research on swirling flow pneumatic conveying system of coal particle, Coal Mine Machinery, 42, 11, pp. 1-4, (2021)
  • [2] GAO Luohui, YAO Zhenqiang, LIANG Xinguang, Et al., Research for the wall wear of horizontal pipeline in swirling flow pneumatic transport based on the computational fluid dynamics simulation analysis, Machine Design & Research, 28, 2, pp. 88-92, (2012)
  • [3] MEINECKE Marvin, KILZER Andreas, WEIDNER Eckhard, Imaging method for mass transport measurements in a two-phase bubbly flow of supercritical CO<sub>2</sub> and viscous liquids in a static mixer, The Journal of Supercritical Fluids, 159, (2020)
  • [4] MENG Huibo, HAN Mengqi, YU Yanfang, Et al., Numerical evaluations on the characteristics of turbulent flow and heat transfer in the Lightnin static mixer, International Journal of Heat and Mass Transfer, 156, (2020)
  • [5] VALDES Juan P, KAHOUADJI Lyes, MATAR Omar K., Current advances in liquid-liquid mixing in static mixers: A review, Chemical Engineering Research and Design, 177, pp. 694-731, (2022)
  • [6] SCALA Marco, GAMET Lionel, MALBEC Louis-Marie, Et al., Hydrodynamics of gas-liquid dispersion in transparent Sulzer static mixers SMX<sup>TM</sup>, Chemical Engineering Science, 213, (2020)
  • [7] ARIAN Elias, PAUER Werner, Contributions to the kinetics of the iodide-iodate test reaction for micromixing time calculation with extended incorporation models, Chemical Engineering Science, 237, (2021)
  • [8] AKAR Shima, TAHERI Amin, BAZAZ Razavi, Et al., Twisted architecture for enhancement of passive micromixing in a wide range of Reynolds numbers, Chemical Engineering and Processing-Process Intensification, 160, (2021)
  • [9] LIU Baoqing, GAO Pengfei, SUN Ning, Et al., Experimental investigation on micromixing characteristics of coaxial mixers in viscous system, The Canadian Journal of Chemical Engineering, 98, 8, pp. 1815-1824, (2020)
  • [10] GHANEM Akram, LEMENAND Thierry, DELLA VALLE Dominique, Et al., Static mixers: Mechanisms, applications, and characterization methods—A review, Chemical Engineering Research and Design, 92, 2, pp. 205-228, (2014)