Analysis of the mechanical behavior of asphalt pavement under multiple coupling effects

To reveal the damage mechanism of asphalt pavement caused by the spatial rotation of the stress principal axis, and the influence range of excess pore water pressure on the pavement under the coupling action of multiple fields, the finite element software was used to build the three-dimensional highway asphalt pavement models. Under the consideration of gravity's impact on dynamic computation results, the study investigated the variation patterns of the direction cosines of the principal stress axes of asphalt structural pavement elements under the action of moving loads, as well as the distribution laws of excess pore water pressure. The results indicate that the influence of gravity on dynamic computation results increases gradually with the depth of the pavement, reaching an error of first principal stress of 40.1 % at the bottom of the lower layer. During the movement of loads, the pavement elements directly under the load undergo rotation of the principal stress axes in the xy, xz, and yz planes under different physical fields. With increasing pavement depth, the angle between the first principal stress and the z-axis primarily fluctuates between - 90 degrees to 0 degrees and 90 degrees to 180 degrees. The cosine of the angle between the first principal stress and the x-axis and z-axis undergoes instantaneous positive and negative conversion, which can easily lead to transverse and longitudinal cracks on the road surface. The influence widths of excess pore water pressure along the longitudinal and transverse directions of the pavement increase with the pavement depth, with maximum widths of 5.426 m and 2.075 m, respectively. These findings offer new insights into the mechanisms behind the formation of transverse and longitudinal cracks on asphalt pavement and hold significant implications for the improvement of asphalt design methods.