Centrifugal model tests on stability of large-diameter cylinders under wave loads simulated by water-level difference method

被引：0
作者：
Ren, Guofeng [1 ,2 ]
Guan, Yunfei [1 ,2 ]
Zhou, Chuner [3 ]
Gu, Xingwen [1 ,2 ]
Xu, Guangming [1 ,2 ]
机构：
[1] Geotechnical Engineering Department, Nanjing Hydraulic Research Institute, Nanjing
[2] The National Key Laboratory of Water Disaster Prevention, Nanjing
[3] Guangdong Province Planning and Design Institute for Water Transpotation Co., Ltd., Guangzhou
来源：
Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering | 2024年 / 46卷
关键词：
centrifugal model test; large-diameter cylinder structure; mechanism; stability; water-level difference method;
D O I：
10.11779/CJGE2024S10046
中图分类号：
学科分类号：
摘要：
A type of cylinder structure with large diameter and height is employed in an artificial island project subjected to harsh wave conditions. The centrifugal model tests on the stability of large cylinder under wave loads is carried out by using the water-level difference method to simulate the wave loads. The results show that the cylinder translates approximately under 25-year wave suction loads with the lateral displacement of 353 mm and the settlement of the cylinder top of 187 mm, respectively. The mean circumferential tensile stress of the cylinder wall during construction is about 90 MPa, which is within the allowable stress range of steel cylinder materials. The soil pressure at the sea side of the cylinder wall tends to be stable with the increase of the water-level difference to the peak value, indicating that there is no new relative displacement trend between the cylinder and the surrounding soils, and the large-diameter steel cylinder revetment structure is stable and safe under wave loads. © 2024 Chinese Society of Civil Engineering. All rights reserved.
引用
收藏
页码：27 / 31
页数：4
相关论文
共 6 条
  • [1] ZHOU Xireng, LIU Jialing, Several problems about the application of large cylinder structure in port engineering and the calculation of the structural design, Port Engineering, 72, pp. 1-10, (1994)
  • [2] ZHU Cunhong, DENG Bing, Discussion on the application research of submerged large cylinder in deep water wharf structure, Journal of Waterway and Harbor, 12, pp. 1-17, (1997)
  • [3] LIU Jianqi, CHEN Zhaizhu, Stability calculation of large diameter cylindrical structure with shallow subsidence, Journal of Tianjin University, 27, 4, pp. 460-467, (1994)
  • [4] ZHU Cunhong, ZHANG Fengzhan, ZHANG Lili, Investigation on theoretical issues of buried large-diameter cylinder, Port Engineering Technology, 39, 1, pp. 19-22, (2002)
  • [5] XU Guangming, ZHANG Weimin, LAI Zhongzhong, Centrifuge modeling of quay walls composed of large-diameter cylinders embedded below mud line, The Ocean Engineering, 19, 1, pp. 38-44, (2001)
  • [6] CHEN Fuquan, YANG Min, Numerical analysis of behavior of large diameter cylindrical wharf structure, Journal of Tongji University (Natural Science), 30, 7, pp. 797-801, (2002)
1