Preparation and thermal conductivity of flexible phase change composite materials with oriented thermal conductivity structure

被引：0

作者：

Wang, Chouxuan ^{[1
]}

Yang, Hang ^{[1
]}

Zhao, Zhongguo ^{[1
]}

Liu, Xinyue ^{[1
]}

Xue, Rong ^{[1
]}

Chen, Chengzhi ^{[1
]}

Wang, Kaiyuan ^{[1
]}

机构：

[1] National Joint Engineering Laboratory of Slag Comprehensive Utilization and Environmental Protection Technology, College of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2025年 / 42卷 / 02期

关键词：

composite materials; mechanical properties; orientation structure; photothermal conversion; thermal conductivity;

D O I：

10.13801/j.cnki.fhclxb.20240520.003

中图分类号：

学科分类号：

摘要：

To address the issue of poor inherent thermal conductivity in polymer-based composites, this work employed a simple, efficient, and industrially viable kneading method to construct an ordered orientation structure within a polyolefin elastomer (POE) matrix, resulting in a flexible phase-change composite material with outstanding comprehensive performance. Under the strong shear field of the kneader, paraffin wax (PW) and boron nitride (BN) were oriented and arranged along the shear field direction within the POE matrix, facilitating the construction of thermal conduction pathways. When the graphene nanoplatelets (GNPs) and BN content were 2wt% and 25wt%, respectively, the thermal conductivity (λ) of the PW-2wt%GNPs-25wt%BN/POE phase-change composite material increased from 1.01 W·m−1·K−1 (PW/POE) to 2.59 W·m−1·K−1, representing a 156% enhancement. Moreover, the PW-2wt%GNPs-25wt%BN/POE phase-change composite material exhibited excellent tensile strength (21.1 MPa) and elongation at break (719%), with no signs of rupture after bending and folding into complex shapes, and demonstrated good recoverability in 10 cycles of tensile testing. Furthermore, adding 30wt% PW can endow PW-2wt%GNPs25wt%BN/POE composite material with a certain enthalpy value of 44.1 J·g−1. Under an illumination intensity of 80 mW·cm−2, the temperature inside a bottle coated with the PW-2wt%GNPs-25wt%BN/POE composite material reached 54.3℃, which was 20℃ higher than that of the PW/POE without GNPs. Moreover, under illumination conditions, the PW-2wt%GNPs-25wt%BN/POE composite material exhibited excellent light-driven recoverable performance, suggesting its potential application in photothermal conversion, and thereby possessing significant potential for practical applications and industrial production. © 2025 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：812 / 824

页数：12

共 26 条

[1]

FAN L W, FANG X, WANG X, Et al., Effects of various carbon nanofillers on the thermal conductivity and energy storage properties of paraffin-based nanocomposite phase change materials, Applied Energy, 110, 10, pp. 163-172, (2013)

[2]

ZHENG J L, DENG Y, LIU Y L, Et al., Paraffin/polyvinyl alcohol/MXene flexible phase change composite films for thermal management applications, Chemical Engineering Journal, 453, P1, (2023)

[3]

SATHISHKUMAR A S, BALASUBRAMANIAN K A, RAMKUMAR T., Investigations on thermal properties of MWCNTNBN paraffin wax phase change material for thermal storage applications, Journal of Thermal Analysis and Calorimetry, 148, 13, pp. 3263-3271, (2023)

[4]

LI R F, ZHOU Y, DUAN X L., A novel composite phase change material with paraffin wax in tailings porous ceramics, Applied Thermal Engineering: Design, Processes, Equipment, Economics, 151, pp. 115-123, (2019)

[5]

QI G Q, YANG J, BAO R Y, Et al., Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage, Carbon: An International Journal Sponsored by the American Carbon Society, 88, pp. 196-205, (2015)

[6]

YANG Xiaotian, SHEN Liangyu, WANG Cailong, Et al., Modification of inorganic composite phase change thermal storage systems by paraffin waxes, Acta Materiae Compositae Sinica, 39, 5, pp. 2421-2429, (2022)

[7]

GUO Z J, LIN F K, QIAO J X, Et al., A modified kapok fiber based phase change composite for highly-efficient solar-thermal conversion, Nano Energy, 108, pp. 108205-108214, (2023)

[8]

WANG Z K, ZHANG X G, XU Y F, Et al., Preparation and thermal properties of shape-stabilized composite phase change materials based on paraffin wax and carbon foam, Polymer, 237, pp. 124361-124370, (2021)

[9]

SHEN J P, LIU Z T, XU B, Et al., Tuning the thermal, mechanical, and combustion properties of NC-TEGDN-RDX propellants via incorporation of graphene nanoplates, Journal of Energetic Materials, 38, 1-4, pp. 326-335, (2020)

[10]

MO Z J, MO P J, YI M M, Et al., Ti3C2TX@polyvinyl alcohol foam-supported phase change materials with simultaneous enhanced thermal conductivity and solar-thermal conversion performance, Solar Energy Materials and Solar Cells, 219, 1, (2021)

← 1 2 3 →