Localized particle patterning via standing surface acoustic wave micromanipulation

被引：0

作者：

Zhang Y. ^{[1
,2
]}

Liu J. ^{[1
]}

Liu M. ^{[1
]}

You R. ^{[1
,2
]}

He S. ^{[1
]}

机构：

[1] Institute of Acoustics, Chinese Academy of Sciences, Beijing

[2] University of Chinese Academy of Sciences, Beijing

来源：

Shengxue Xuebao/Acta Acustica | 2024年 / 49卷 / 03期

关键词：

Micromanipulation; Modulated short pulse; Particle patterning; Standing surface acoustic wave;

D O I：

10.12395/0371-0025.2023020

中图分类号：

学科分类号：

摘要：

The current method of micromanipulation using standing surface acoustic waves generates standing wave patterns across the full width of the microfluidic channel and lacks the ability to perform localized manipulations. This paper analyzes and quantifies techniques for generating and controlling localized particle patterns in acoustic micromanipulation structures using surface acoustic waves of short-pulse excitation. An analytical computational model is developed to study waveform propagation under short-pulse excitation, considering the contribution of each finger pair in the forked-finger transducer. Additionally, a full-section simulation model of the vertical surface acoustic wave micromanipulator is combined with the finite element method to study the time-averaged base displacement of the micromanipulator and changes in the acoustic field distribution when pulse delay and frequency modulation are applied to the excitation signal. To validate the theoretical model, the micromanipulator device is fabricated and experimentally tested. The results demonstrate that modifying the relative time delay and an effective pulse time of the excitation signal enables effective control of the position and width of the generated standing wave region in the acoustic field, with a positive linear correlation between the two parameters and consistency with both theoretical and simulation results. © 2024 Science Press. All rights reserved.

引用

页码：464 / 471

页数：7

共 18 条

[1] Ozcelik A, Rufo J, Guo F, Et al., Acoustic tweezers for the life sciences, Nat. Methods, 15, 12, pp. 1021-1028, (2018)
[2] 5
[3] 2, (2013)
[4] Meng L, Cai F, Jiang P, Et al., On-chip targeted single cell sonoporation with microbubble destruction excited by surface acoustic waves, Appl. Phys. Lett, 104, 7, (2014)
[5] Meng L, Cai F, Zhang Z, Et al., Transportation of single cell and microbubbles by phase-shift introduced to standing leaky surface acoustic waves, Biomicrofluidics, 5, 4, (2011)
[6] Chen Y, Ding X, Steven Lin S C, Et al., Tunable nanowire patterning using standing surface acoustic waves, ACS Nano, 7, 4, pp. 3306-3314, (2013)
[7] Shi J, Ahmed D, Mao X, Et al., Acoustic tweezers: Patterning cells and microparticles using standing surface acoustic waves (SSAW), Lab Chip, 9, 20, pp. 2890-2895, (2009)
[8] Ding X, Lin S C S, Kiraly B, Et al., On-chip manipulation of single microparticles, cells, and organisms using surface acoustic waves, Proc. Natl. Acad. Sci. U. S. A, 109, 28, pp. 11105-11109, (2012)
[9] Nguyen T D, Fu Y Q, Tran V T, Et al., Acoustofluidic closed-loop control of microparticles and cells using standing surface acoustic waves, Sens. Actuators, B, 318, (2020)
[10] Collins D J, Devendran C, Ma Z, Et al., Acoustic tweezers via sub–time-of-flight regime surface acoustic waves, Sci. Adv, 2, 7, (2016)

← 1 2 →