A Kinetic Model for Ferrite-Austenite Transformation

被引：0
|
作者：
Lan H.-F. [1 ]
Liu Z.-Y. [1 ]
Wu M.-R. [1 ]
机构：
[1] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang
来源：
Dongbei Daxue Xuebao/Journal of Northeastern University | 2023年 / 44卷 / 07期
关键词：
ferrite-austenite transformation; Gibbs energy balance; phase transformation kinetics; solute drag effect;
D O I：
10.12068/j.issn.1005-3026.2023.07.004
中图分类号：
学科分类号：
摘要：
In this paper,based on the concepts of mixed model and Gibbs energy balance model, a simple Gibbs energy balance model was established to simulate the ferrite-austenite transformation of Fe-C-Mn low carbon steel during the intercritical annealing at 780℃. The effects of Gibbs free energy, effective grain size and alloying distribution on the transformation were studied. The results show that the initial effective grain size and interfacial mobility greatly affected the kinetics of phase transformation, while they had little effect on the final volume fraction of the austenite. The dissipation energy caused by the Mn enrichment at the interface during phase transformation slowed down the transformation kinetics and reduced the final volume fraction of the austenite. It is found that the modelling results above are in good accordance with the experimental ones. © 2023 Northeastern University. All rights reserved.
引用
收藏
页码：938 / 943
页数：5
相关论文
共 24 条
  • [11] Krielaart G P, Sietsma J, van der Zwaag S., Ferrite formation in Fe-C alloys during austenite decomposition under non-equilibrium interface conditions [ J], Materials Science and Engineering:A, 237, 2, pp. 216-223, (1997)
  • [12] Chen H, van der Zwaag S., Modeling of soft impingement effect during solid-state partitioning phase transformations in binary alloys, Journal of Materials Science, 46, 5, pp. 1328-1336, (2011)
  • [13] Chen Hao, Zhang Cong-yu, Zhu Jia-ning, Et al., Austenite/ ferrite interface migration and alloying elements partitioning: an overview, Acta Metallurgica Sinica, 54, 2, pp. 217-227, (2018)
  • [14] Huizenga R M, Bos C, Sietsma J., Interface conditions during mixed-mode phase transformations in metals[J], Journal of Materials Science, 43, 11, pp. 3744-3749, (2008)
  • [15] Chen H, van der Zwaag S., A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys[J], Acta Materialia, 72, pp. 1-12, (2014)
  • [16] An D, Pan S, Ren Q, Et al., A Gibbs energy balance model for the isothermal ferrite-to-austenite transformation[J], Scripta Materialia, 178, pp. 207-210, (2020)
  • [17] Purdy G R, Brechet Y., A solute drag treatment of the effects of alloying elements on the rate of the proeutectoid ferrite transformation in steels[J], Acta Metallurgica et Materialia, 43, 10, pp. 3763-3774, (1995)
  • [18] Militzer M, Meczzi M, Sietsma J, Et al., Three-dimensional phase field modelling of the austenite-to-ferrite transformation [J], Acta Materialia, 54, 15, pp. 3961-3972, (2006)
  • [19] Chen H, Borgenstam A, Odqvist J, Et al., Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels[J], Acta Materialia, 61, 12, pp. 4512-4523, (2013)
  • [20] Chen H, Zhu K, Zhao L, Et al., Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys [ J ], Acta Materialia, 61, 14, pp. 5458-5468, (2013)
123