A Kinetic Model for Ferrite-Austenite Transformation

被引：0
|
作者：
Lan H.-F. [1 ]
Liu Z.-Y. [1 ]
Wu M.-R. [1 ]
机构：
[1] State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang
来源：
Dongbei Daxue Xuebao/Journal of Northeastern University | 2023年 / 44卷 / 07期
关键词：
ferrite-austenite transformation; Gibbs energy balance; phase transformation kinetics; solute drag effect;
D O I：
10.12068/j.issn.1005-3026.2023.07.004
中图分类号：
学科分类号：
摘要：
In this paper,based on the concepts of mixed model and Gibbs energy balance model, a simple Gibbs energy balance model was established to simulate the ferrite-austenite transformation of Fe-C-Mn low carbon steel during the intercritical annealing at 780℃. The effects of Gibbs free energy, effective grain size and alloying distribution on the transformation were studied. The results show that the initial effective grain size and interfacial mobility greatly affected the kinetics of phase transformation, while they had little effect on the final volume fraction of the austenite. The dissipation energy caused by the Mn enrichment at the interface during phase transformation slowed down the transformation kinetics and reduced the final volume fraction of the austenite. It is found that the modelling results above are in good accordance with the experimental ones. © 2023 Northeastern University. All rights reserved.
引用
收藏
页码：938 / 943
页数：5
相关论文
共 24 条
  • [1] Goune M, Danoix F, Agren J, Et al., Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels [ J ], Materials Science and Engineerings, 92, pp. 1-38, (2015)
  • [2] van Bohemen S M C, Sietsma J., The kinetics of bainite and martensite formation in steels during cooling [ J], Materials Science and Engineering: A, 527, 24, pp. 6672-6676, (2010)
  • [3] Etesami S A, Enayati M H., Microstructural evolution and recrystallization kinetics of a cold-rolled, ferrite-martensite structure during intercritical annealing[ J], Metallurgical and Materials Transactions A, 47, pp. 3271-3276, (2016)
  • [4] Kulakov M, Poole W J, Militzer M., The effect of the initial microstructure on recrystallization and austenite formation in a DP600 steel[J], Metallurgical and Materials Transactions A, 44, pp. 3564-3576, (2013)
  • [5] Zheng C W, Raabe D., Interaction between recrystallization and phase transformation during intercritical annealing in a cold-rolled dual-phase steel:a cellular automaton model[ J], Acta Materialia, 61, 19, pp. 5504-5517, (2013)
  • [6] Chbihi A, Barbier D, Germain L, Et al., Interactions between ferrite recrystallization and austenite formation in high-strength steels [ J ], Journal of Materials Science, 49, pp. 3608-3621, (2014)
  • [7] Mecozzi M G, Bos C, Sietsma J., A mixed-mode model for the ferrite-to-austenite transformation in a ferrite/ pearlite microstructure[J], Acta Materialia, 88, pp. 302-313, (2015)
  • [8] Zener C., Theory of growth of spherical precipitates from solid solution, Journal of Applied Physics, 20, 10, pp. 950-953, (1949)
  • [9] Hillert M., Diffusion and interface control of reactions in alloys[J], Metallurgical Transactions A, 6, pp. 5-19, (1975)
  • [10] Sietsma J, van der Zwaag S., A concise model for mixed-mode phase transformations in the solid state[J], Acta Materialia, 52, 14, pp. 4143-4152, (2004)
123