Roof cutting mechanism of dense drilling in gob-side entry retaining and determination method of key parameters

被引：0
|
作者：
Liu S. [1 ,2 ]
Li X. [1 ]
Zhu W. [3 ]
Fu M. [1 ,2 ]
Zhang D. [4 ]
Peng B. [4 ]
机构：
[1] School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo
[2] State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Jiaozuo
[3] China Railway Construction Group Co., Ltd., Beijing
[4] Sichuan Chuanmei Huarong Energy Co., Ltd., Chengdu
来源：
Meitan Kexue Jishu/Coal Science and Technology (Peking) | 2024年 / 52卷 / 02期
关键词：
curved triangle plate; dense drilling; gob-side entry retaining; pressure relief by roof cutting; stress concentration between holes;
D O I：
10.12438/cst.2023-1760
中图分类号：
学科分类号：
摘要：
To achieve the safe and stable structural condition of the roof along the goaf under the roof cutting by dense drilling method, the stress distribution and fracture process of the roof strata between normal and dense drilling conditions were studied. Based on rock fracture theory and elastic theory, the stress distribution of the surrounding rock between dense drilling and the fracture process were analyzed before and after mining, clarifying the cutting mechanism of dense drilling and the interaction mechanism of concentrated stress between adjacent drilling. The calculation formula for the tensile-shear stress of the surrounding rock between dense drilling in the arc-shaped triangular panel structure at the end of the working face was derived. Based on this, the influence of different parameters on the tensile-shear stress of the surrounding rock between drilling was analyzed, and a determination method for the key parameters of roof cutting by dense drilling holes along the goaf was proposed. Research has shown that the dense drilling mainly increases the concentration of the surrounding rock's tensile and shear stress by changing the stress conditions around the densely drilled holes before and after mining, causing the expansion and connection of fractures between drilling and forming key rock layers for cutting. Before mining, the drill holes are mainly affected by horizontal compression stress, and after mining, the stress gradually changes to the tensile and shear stress caused by the rotation and subsidence of the goaf roof, and the state of the surrounding rock between the holes transitions from the weakening stage to the formation of crack stage, and then to the fracture stage. The magnitude of the tensile and shear stress of the surrounding rock between the densely drilled holes mainly depends on the thickness of the key rock layer and the ratio of the hole diameter to the hole spacing, and is negatively correlated with the hole height and spacing, and positively correlated with the angle and diameter of the drill holes. Based on this, a method for determining the key parameters of intensive drilling and cutting is proposed, and a plan for intensive drilling and cutting in the goaf with hard roof conditions on the 3124 N working face of Longtan Mine is designed, with a hole length of 8.3 m, an angle of 15°, a hole diameter of 48 mm, and a spacing of 500 mm. The deformation of the goaf roof after cutting is controllable and the overall stability is good, which proves that the arrangement parameters of intensive drilling and cutting are reasonable, and the determination method for the key parameters of roof cutting by dense drilling holes is effective and feasible. © 2024 China Coal Society. All rights reserved.
引用
收藏
页码：23 / 33
页数：10
相关论文
共 27 条
  • [21] (2010)
  • [22] CHENG Xiangdong, Study on field test of gob-side entry retaining by roof cutting with hard roof and deformation evolution mechanism of roof structure, Baotou: Inner Mongolia University of Science and Technology, pp. 77-78, (2022)
  • [23] YANG Shengli, WANG Jiachen, LI Lianghui, Analysis of deformation and fracture characteristics of key strata based onthe medium thick plate theory[J], Journal of China Coal Society, 45, 8, pp. 2718-2727, (2020)
  • [24] GUO Wenbing, HAN Mingzhen, YANG Weiqiang, Et al., Research and application of maximum surface subsidencemodel under the condition of repeated mining in weakly cemented strata[J], Coal Science and Technology, 51, 9, (2023)
  • [25] SUN Xiaoming, LIU Xin, LIANG Guangfeng, Et al., Study on key parameters of goaf retaining roadway for roof cutting and unloading in thin coal seam[J], Chinese Journal of Rock Mechanics and Engineering, 33, 7, pp. 1449-1456, (2014)
  • [26] ZHANG Sheng, WANG Xiaoliang, WU Ziqiang, Et al., Status analy-sis of the key parameters of blasting borehole and the retaining ef-fect for gob-side entry retaining by the way of roof cutting and pressure releasing[J], Journal of Henan Polytechnic Universi-ty(Natural Sci-ence), 38, 6, (2019)
  • [27] TAI Yang, 3D breaking characteristics of overlying strata and stress field evolution law in stope with directional hard roof cutting, Xuzhou: China University of Mining and Technology, pp. 84-85, (2021)
123