Research progress on biomass-based flexible supercapacitors

被引：0
|
作者：
Zhang X. [1 ]
Lin L. [1 ]
Zhang J. [2 ]
Liu J. [1 ]
机构：
[1] Jilin Provincial Key Laboratory of Wooden Materials Science and Engineering, Beihua University, Jilin, Jilin
[2] School of Science, Beihua University, Jilin, Jilin
来源：
Jingxi Huagong/Fine Chemicals | 2024年 / 41卷 / 04期
关键词：
assembly modes; biomass; diaphragm; electrode materials; flexiblity;
D O I：
10.13550/j.jxhg.20230451
中图分类号：
学科分类号：
摘要：
With the development of wearable devices and the improvement in public awareness of environmental protection, exploration for high-performance and green economic flexible electrochemical energy storage devices has become a research hotspot. High-performance energy storage materials prepared from biomass can significantly reduce production costs and achieve sustainable utilization of carbon resources, showing great development potential and practical application value. Herein, the electrode materials, flexible membranes and various assembly methods of flexible supercapacitors were introduced, followed by analysis on the characteristics and advantages of electrode materials based on wood, cellulose gel, paper and biomass waste as well as the research status quo of biomass-based flexible membranes, including cellulose paper diaphragm and biological diaphragm. In addition, the flexible supercapacitors in stacked type (sandwich type), interdigital type (micro-interdigital type), fiber type (linear type) were reviewed, with their performance differences compared. Finally, the challenges of biomass materials used in flexible supercapacitors and the future development directions were discussed. © 2024 Fine Chemicals. All rights reserved.
引用
收藏
页码：719 / 727
页数：8
相关论文
共 72 条
  • [1] LI Y M, HAO G D, CUI P, Et al., Research progress of electrode materials for supercapacitors, Chemical Industry and Engineering, 37, 1, pp. 17-33, (2020)
  • [2] BAI Y, ZHAO W, BI S, Et al., Preparation and application of cellulose gel in flexible supercapacitors, Journal of Energy Storage, 42, (2021)
  • [3] LU X H, YU M H, WANG G M, Et al., Flexible solid-state supercapacitors: Design, fabrication and applications, Energy Environmental Science, 7, 7, pp. 2160-2181, (2014)
  • [4] XU J, LEI J, MING N, Et al., Rational design of wood-structured thick electrode for electrochemical energy storage, Advanced Functional Materials, 32, 35, (2022)
  • [5] HUANG J, ZHAO B, LIU T, Et al., Wood-derived materials for advanced electrochemical energy storage devices, Advanced Functional Materials, 29, 31, (2019)
  • [6] SHAN X, WU J, ZHANG X, Et al., Wood for application in electrochemical energy storage devices, Cell Reports Physical Science, 2, 12, (2021)
  • [7] LIU F, GAO Y, ZHANG C, Et al., Highly microporous carbon with nitrogen-doping derived from natural biowaste for high-performance flexible solid-state supercapacitor, Journal of Colloid and Interface Science, 548, pp. 322-332, (2019)
  • [8] PENG Z, ZHONG W., Facile preparation of an excellent mechanical property electroactive biopolymer-based conductive composite film and self-enhancing cellulose hydrogel to construct a high-performance wearable supercapacitor, ACS Sustainable Chemistry & Engineering, 8, 21, pp. 7879-7891, (2020)
  • [9] POORNIMA B H, VIJAYAKUMAR T., Hydrothermal synthesis of Boron-doped porous carbon from Azadirachta Indica wood for supercapacitor application, Inorganic Chemistry Communications, 145, (2022)
  • [10] JIA D, YU X, TAN H, Et al., Hierarchical porous carbon with ordered straight micro-channels templated by continuous filament glass fiber arrays for high performance supercapacitors, Journal of Materials Chemistry A, 5, 4, pp. 1516-1525, (2017)
12345678