Effect of Cr content on the microstructure evolution in weld metal for 1000 MPa grade high strength steel

被引：0

作者：

Feng, Wei ^{[1
]}

Yu, Tingxiang ^{[1
,2
]}

Chen, Bo ^{[1
]}

Zhang, Qingsu ^{[1
]}

Cai, Hongguang ^{[3
]}

Zhang, Biying ^{[1
]}

Ma, Qiang ^{[4
]}

机构：

[1] Harbin Well Welding Co., Ltd., Harbin

[2] Harbin Welding Institute Limited Company, Harbin

[3] Dalian Jinzhou Heavy Machinery Group Co., Ltd., Dalian

[4] Jiangsu Rongda Material Corrosion Inspection Co., Ltd., Wuxi

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2024年 / 45卷 / 09期

关键词：

1000 MPa grade high strength steel; confocal laser scanning microscope; Cr content; deposited metal; microstructure evolution;

D O I：

10.12073/j.hjxb.20240409001

中图分类号：

学科分类号：

摘要：

Five kinds of submerged arc welding materials of 1000 MPa grade high strength steel with different Cr content were designed and deposited metals with Cr content of 0% ~ 0.9% were prepared by wire electrode submerged arc welding. OM, SEM, TEM and CLSM were used to study the effect of Cr content on the microstructure evolution of 1000 MPa grade high strength steel, and the mechanical properties were evaluated by tensile and impact tests. The results show that, with the increase of Cr content, the initial temperature of ferrite transition increases from 723.3 ℃ to 740.2 ℃, and the initial temperature of bainite transition decreases from 470.2 ℃ to 458.5 ℃. The range of ferrite transition temperature expands, and the bainite transition rate is faster in high Cr deposited metal. The acicular ferrite and bainite ferrite in deposited metal increased, the M-A component gradually showed chain segregation from dispersion, and the proeutectoid ferrite and residual austenite decreased. The impact fracture of deposited metal changes from ductile fracture with low Cr to quasi-cleavage fracture with high Cr. Compared with 0 Cr, the tensile strength and yield strength of 0.9%Cr are increased by 12.4% and 17.0%, respectively. The impact absorption energy of deposited metal increases first and then decreases. At −40 ℃, the low temperature toughness of deposited metal with Cr content of 0.6% is the highest, which is 84 J. When Cr content of deposited metal is 0.6%, the matching effect of strength and toughness is the best. © 2024 Harbin Research Institute of Welding. All rights reserved.

引用

页码：76 / 83

页数：7

共 19 条

[1]

Cai B F, Zhang L, Lei Y, Et al., A deeper understanding of the CO<sub>2</sub> emission pathway under China’s carbon emission peak and carbon neutrality goals, Engineering, 30, 11, pp. 27-29, (2023)

[2]

Wang J, Zhang S L, Zhang Q J., The relationship of renewable energy consumption to financial development and economic growth in China[J], Renewable Energy, 170, pp. 897-904, (2021)

[3]

Perez-Diaz J I, Chazarra M, Garcia-Gonzalez J, Et al., Trends and challenges in the operation of pumped-storage hydropower plants[J], Renewable and Sustainable Energy Reviews, 44, pp. 767-784, (2015)

[4]

Kang Dandan, Wan Tianming, Wang Gaojian, Et al., Research progress of 1 000 MPa ultra-high strength steel for hydropower, Hot Working Technology, 47, 15, pp. 11-13, (2018)

[5]

Jia T, Wang S, Xiao N, Et al., Quantitative investigation on strengthening and toughening mechanism of 1000 MPa grade hydropower steel[J], Journal of Materials Engineering and Performance, 32, 5, pp. 2193-2204, (2023)

[6]

Cao Zhilong, Zhu Hao, An Tongbang, Et al., Analysis of the strengtheningandtougheningmechanismofdepositedmetalof1000 MPa grade high strength steel, Transactions of the China Welding Institution, 44, 7, pp. 116-122, (2023)

[7]

Dhua S K, Mukerjee D, Sarma D S., Weldability and microstructural aspects of shielded metal arc welded HSLA-100 steel plates, ISIJ international, 42, 3, pp. 290-298, (2002)

[8]

Lu J, Yu H, Duan X, Et al., Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel, Materials Science and Engineering: A, 774, (2020)

[9]

Huter C, Lin M X, Schicchi D, Et al., A multiscale perspective on the kinetics of solid state transformations with application to bainite formation[J], AIMS Materials Science, 2, 4, pp. 319-345, (2015)

[10]

Zhang Tianli, Wu Wen, Yu Hang, Et al., Research progresses on influences of alloying elements on formation of bainite and mechanical properties for high-strength steel weld metals, China Mechanical Engineering, 32, 14, pp. 1743-1756, (2021)

← 1 2 →