Development and thermal calculation method of 0−1 mm pulverizing system for powdered coal-circulating fluidized bed boiler

被引：0

作者：

Shang M. ^{[1
]}

Yao Y. ^{[1
]}

Ke X. ^{[1
]}

Zhou T. ^{[1
]}

Huang Z. ^{[1
]}

机构：

[1] Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Tsinghua University, Beijing

来源：

Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) | 2024年 / 55卷 / 04期

关键词：

0−1 mm powdered coal; powdered coal-circulating fluidized bed; pulverizing system; thermal calculation;

D O I：

10.11817/j.issn.1672-7207.2024.04.025

中图分类号：

学科分类号：

摘要：

To realize the 0−1 mm coal feeding of the powdered coal-circulating fluidized bed, a 0−1 mm pulverizing system for PC-CFB boiler was developed based on the design and calculation experience of traditional pulverizing system. It was characterized by the use of vertical spindle mill to prepare the powdered coal and the use of gas-solid distributor to separate the powdered coal from exhaust gas, and a backup system was set to ensure the normal fuel supply in case of system failure. The thermal calculation model of the 0 − 1 mm pulverizing system was proposed, the key technical indicators such as the ventilation volume of the mill, the proportion and temperature of the desiccant were determined, the drying output of the pulverizing system was predicted, and the performance of the 0−1 mm pulverizing system for PC-CFB boiler was analyzed. The results show that keeping the output of the mill and the temperature of the hot air constant and reducing the outlet temperature of the mill within the allowable range of the system can reduce the drying dosage and increase the drying output. For every 1 ℃ reduction in the outlet temperature of the mill, the drying dosage required by the pulverizing system is reduced by about 523 m3/h, and the drying output is increased by about 0.4 t/h. © 2024 Central South University of Technology. All rights reserved.

引用

页码：1560 / 1566

页数：6

共 19 条

[1] NIE Xin, XIE Haiyan, YANG Dong, Et al., Safety analysis for boiler thermal-hydraulic circulation with severe peak load regulation of a CFB unit, Journal of Central South University(Science and Technology), 53, 7, pp. 2766-2776, (2022)
[2] LU Junfu, SHANG Manxia, KE Xiwei, Et al., Powdered coal circulating fluidized bed combustion technology, Journal of China Coal Society, 48, 1, (2023)
[3] SHANG Manxia, HUANG Zhong, ZHANG Man, Et al., A circulating fluidized bed combustion system for powdered coal with extremely narrow sieve size
[4] YANG Shi, YANG Hairui, LU Junfu, Et al., The new generation combustion technology for energy saving circulating fluidized bed boilers, Journal of Power Engineering, 29, 8, (2009)
[5] LI Guosheng, PAN Yanlong, LIU Zhongyuan, Et al., Analysis of influencing factors of the solid concentration distribution in circulating fluidized bed boiler, Journal of Engineering for Thermal Energy and Power, 33, 3, (2018)
[6] SHANG Manxia, YAO Yuge, KE Xiwei, Et al., Numerical simulation of product fineness of a vertical spindle mill based on PC-CFB technology, Journal of Central South University (Science and Technology), 54, 11, pp. 4531-4538, (2023)
[7] YANG Chendi, Design and optimization of coordinated control system for the subcritical circulating fluidized bed unit, (2018)
[8] YU Luojian, XIN Tong, Bionic optimization for roller crusher [C], 2019 IEEE International Conference on Computation, Communication and Engineering(ICCCE), (2019)
[9] FENG Xugang, ZHANG Zechen, WANG Zhengbing, Et al., Thermal power unit powder system control strategy based on IGPC-NADRC, Journal of Central South University (Science and Technology), 54, 7, pp. 2904-2918, (2023)
[10] YUE Guangxi, LU Junfu, ZHANG Hai, Et al., Design theory of circulating fluidized bed boilers[C], Proceedings of 18th International Conference on Fluidized Bed Combustion, pp. 135-146, (2005)

← 1 2 →