A Calculation Modelfor Penetration Depth of Tungsten Ball against Low-carbon Steel Considering Sphere Deformation

被引：0

作者：

Liu T. ^{[1
]}

Wang X. ^{[1
]}

Xu Y. ^{[1
,2
,3
]}

Li Y. ^{[1
]}

Zhang J. ^{[1
]}

机构：

[1] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing

[2] Key Laboratory of High Energy Density Materials of Ministry of Education, Beijing

[3] Beijing Institute of Technology Chongqing Innovation Center, Chongqing

来源：

Binggong Xuebao/Acta Armamentarii | 2024年 / 45卷 / 05期

关键词：

depth of penetration; low-carbon steel; plastic deformation; spherical cavity expansion; tungsten ball;

D O I：

10.12382/bgxb.2022.1013

中图分类号：

学科分类号：

摘要：

In order to study the influence of deformation behavior of tungsten ball on penetration effect under high-speed impact, the penetrationof tungsten ball into a semi-infinite low-carbon steel target is experimentally studied, and the deformation characteristics of tungsten ball and the change rule of penetration depth versus impact velocity of target plate at 1 600 m / s are obtained through experiment. On this basis, a plastic deformation model of tungsten ball is constructed. A calculation model of tungsten ball deformation penetration depth is established by combining the projectile deformation model with the spherical cavity expansion resistance model. The calculated results of the tungsten ball deformable penetration model and the rigid penetration model at different impact velocities are compared. The results show that the deformable penetration model can be used to more accurately calculate the penetration depth of tungsten ball into the semi-infinite target. The maximum error between the calculated results and test results is 20% (the positive error is 15% and the negative error is 5%), and the calculation accuracy of the deformable penetration model is 42. 8% higher than that of the rigid penetration model. © 2024 China Ordnance Industry Corporation. All rights reserved.

引用

页码：1625 / 1636

页数：11

共 25 条

[1]

WU X M., Theoretical and experimental study on penetration of tungsten alloy sphere into finite thickness target, (1999)

[2]

HUANG C Q, ZHU H S., Establishment of limit penetration velocity formula of spherical fragment to target, Journal of Projectiles, Rockets, Missiles and Guidance, 2, pp. 58-61, (1993)

[3]

LIU T L, XU Y X, WANG X F, Et al., Ballistic limit calculation model of tungsten alloy spherical fragments penetrating into low carbon steel plate, Acta Armamentarii, 43, 4, pp. 768-779, (2022)

[4]

ZHANG J, XU Y X, LIU T L, Et al., Oblique penetration effect of a tungsten ball on high hardness steel, Explosion and Shock Waves, 42, 2, pp. 71-82, (2022)

[5]

ZHU X W, HUANG Y S, LI Y C, Et al., Amodel for penetration of limited thickness targets, Journal of Ballistics, 2, pp. 1-6, (2001)

[6]

ZHU W H, ZHAO Y S, LI X D., A model and calculation for the penetration of spherical fragmentto limited-thickness targets, Journal of Ballistics, 3, pp. 20-23, (1997)

[7]

XU Y X, REN J, WANG S S., Research on perforation limit thickness of low carbon steel plates impacted normally by tungsten sphere, Transactions of Beijing Institute of Technology, 37, 6, pp. 551-556, (2017)

[8]

XU Y X, WANG S S, BO X F, Et al., Armor-piercing ultimate of tungsten alloy spherical fragment against low-carbon steel, Journal of Vibration and Shock, 30, 5, pp. 192-195, (2011)

[9]

HU P, WANG S Q, FENG X W, Et al., Experimental investigation on failure behaviors of g50 ultra-high strength steel targets struck by tungsten alloy spherical fragments at high velocity[J], Frontiers in Materials, 7, (2021)

[10]

ROISMAN I V, TROPEA C., Impact of a crushing ice particle onto a dry solid wall, Proceedings of the Royal Society A Mathematical Physical & Engineering Sciences, 471, 2183, (2015)

← 1 2 3 →