Experimental research on the mechanical properties of fiber-reinforced autoclaved aerated concrete under cyclic loading

被引:0
|
作者
Quan, Wenli [1 ]
Huang, Wei [1 ]
Mao, Wenzhen [1 ]
Miao, Xinwei [2 ]
Hou, Lina [3 ]
Hao, Lijun [4 ]
机构
[1] School of Civil Engineering, Xi'an University of Architecture & Technology, Xi'an,710055, China
[2] School of Science, Xi'an University of Architecture & Technology, Xi'an,710055, China
[3] College of Architecture Engineering, Xi'an Technological University, Xi'an,710021, China
[4] Hanzhong Derun Environmental Protection Technology Co., Ltd., Hanzhong,724200, China
来源
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2025年 / 42卷 / 02期
基金
中国国家自然科学基金;
关键词
Carbon fiber reinforced plastics - Compaction - Compression testing - Fiber reinforced concrete - Fracture mechanics - Strain rate - Stress-strain curves;
D O I
10.13801/j.cnki.fhclxb.20240511.004
中图分类号
学科分类号
摘要
In order to investigate the compressive mechanical properties of fiber-reinforced autoclaved aerated concrete (FAAC) under cyclic loading, a total of 11 sets of prismatic specimens were designed for uniaxial monotonic and cyclic compression tests. The effects of fiber types (basalt fiber (BF), carbon fiber (CF)) and fiber content on the mechanical performance indicators of FAAC such as failure mode, stress-strain curve characteristics, plastic strain, stiffness degradation rate, and stress degradation rate, were analyzed. The research results indicate that the failure mode of FAAC under cyclic loading contains oblique shear failure and vertical splitting failure, and with the fiber content increasing, the failure mode of FAAC turns from shear failure to splitting failure. When the fiber content is 0.4%, the peak stresses of FAAC reach their maximum values, the peak stresses of BF/autoclaved aerated concrete (AAC) under monotonic and cyclic loading increase 24.29% and 29.16%, respectively, while that of CF/AAC increase 31.45% and 37.81%, respectively. When the fiber content is 0.5%, the peak strains of FAAC reach their maximum values, the peak strains of BF/AAC under monotonic and cyclic loading increase 28.12% and 28.77%, respectively, while that of CF/AAC increase 37.17% and 41.50%, respectively. Both BF and CF slightly improve the cumulative plastic strain of AAC, but there is no significant relationship between fiber content, unloading stiffness, and stress degradation rate. Based on the experimental results, a power function is used to fit the relationship between the standardized plastic stain and unloading strain. Simplified double line models for stress degradation rate, unloading and reloading curves are proposed. Finally, the stress-strain curve calculation equation for FAAC under cyclic loading is established. © 2025 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码:1049 / 1060
相关论文
共 50 条
  • [31] An Experimental Study on Dynamic Mechanical Properties of Fiber-Reinforced Concrete under Different Strain Rates
    Wu, Yuexiu
    Song, Wanpeng
    Zhao, Wusheng
    Tan, Xianjun
    APPLIED SCIENCES-BASEL, 2018, 8 (10):
  • [32] Study on Mechanical Properties of Fiber-reinforced Concrete
    Zhang J.
    Han K.
    Wang M.
    Cheng J.
    Wu R.
    Journal of Engineering Science and Technology Review, 2023, 16 (06) : 44 - 53
  • [33] Research on the Mechanical and Physical Properties of Basalt Fiber-Reinforced Pervious Concrete
    Wu, Jian
    Pang, Qian
    Lv, Yuanyuan
    Zhang, Jinpeng
    Gao, Shan
    MATERIALS, 2022, 15 (19)
  • [34] Mechanical properties of steel fiber-reinforced concrete
    Thomas, Job
    Ramaswamy, Ananth
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2007, 19 (05) : 385 - 392
  • [35] Degradation of the Mechanical Properties of Fiber Reinforced Plastic under Cyclic Loading
    Paimushin, V. N.
    Kayumov, R. A.
    Kholmogorov, S. A.
    MECHANICS OF COMPOSITE MATERIALS, 2023, 59 (2) : 371 - 380
  • [36] Degradation of the Mechanical Properties of Fiber Reinforced Plastic under Cyclic Loading
    V. N. Paimushin
    R. A. Kayumov
    S. A. Kholmogorov
    Mechanics of Composite Materials, 2023, 59 : 371 - 380
  • [37] Research on optimal design of mechanical properties of hybrid fiber-reinforced concrete
    Li, Jiangchuan
    Chang, Jun
    Qiao, Hongxia
    STRUCTURAL CONCRETE, 2022, 23 (03) : 1625 - 1641
  • [38] Mechanical properties and interface improvement of bamboo cellulose nanofibers reinforced autoclaved aerated concrete
    Zhang, Jie
    Huang, Fei
    Wu, Yuchao
    Fu, Tengfei
    Huang, Biao
    Liu, Wendi
    Qiu, Renhui
    CEMENT & CONCRETE COMPOSITES, 2022, 134
  • [39] Mechanical Properties of Autoclaved Aerated Concrete with Different Densities
    Chen, Yu
    Peng, Mei
    Zhang, Ye
    Liu, Yanjun
    ADVANCES IN CIVIL ENGINEERING MATERIALS, 2013, 2 (01): : 441 - 456
  • [40] Bond Behavior in Steel Fiber-Reinforced Concrete Zones under Static and Cyclic Loading: Experimental Evaluations and Analytical Modeling
    Harajli, M. H.
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2010, 22 (07) : 674 - 686