Experimental research on the mechanical properties of fiber-reinforced autoclaved aerated concrete under cyclic loading

被引:0
|
作者
Quan, Wenli [1 ]
Huang, Wei [1 ]
Mao, Wenzhen [1 ]
Miao, Xinwei [2 ]
Hou, Lina [3 ]
Hao, Lijun [4 ]
机构
[1] School of Civil Engineering, Xi'an University of Architecture & Technology, Xi'an,710055, China
[2] School of Science, Xi'an University of Architecture & Technology, Xi'an,710055, China
[3] College of Architecture Engineering, Xi'an Technological University, Xi'an,710021, China
[4] Hanzhong Derun Environmental Protection Technology Co., Ltd., Hanzhong,724200, China
来源
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2025年 / 42卷 / 02期
基金
中国国家自然科学基金;
关键词
Carbon fiber reinforced plastics - Compaction - Compression testing - Fiber reinforced concrete - Fracture mechanics - Strain rate - Stress-strain curves;
D O I
10.13801/j.cnki.fhclxb.20240511.004
中图分类号
学科分类号
摘要
In order to investigate the compressive mechanical properties of fiber-reinforced autoclaved aerated concrete (FAAC) under cyclic loading, a total of 11 sets of prismatic specimens were designed for uniaxial monotonic and cyclic compression tests. The effects of fiber types (basalt fiber (BF), carbon fiber (CF)) and fiber content on the mechanical performance indicators of FAAC such as failure mode, stress-strain curve characteristics, plastic strain, stiffness degradation rate, and stress degradation rate, were analyzed. The research results indicate that the failure mode of FAAC under cyclic loading contains oblique shear failure and vertical splitting failure, and with the fiber content increasing, the failure mode of FAAC turns from shear failure to splitting failure. When the fiber content is 0.4%, the peak stresses of FAAC reach their maximum values, the peak stresses of BF/autoclaved aerated concrete (AAC) under monotonic and cyclic loading increase 24.29% and 29.16%, respectively, while that of CF/AAC increase 31.45% and 37.81%, respectively. When the fiber content is 0.5%, the peak strains of FAAC reach their maximum values, the peak strains of BF/AAC under monotonic and cyclic loading increase 28.12% and 28.77%, respectively, while that of CF/AAC increase 37.17% and 41.50%, respectively. Both BF and CF slightly improve the cumulative plastic strain of AAC, but there is no significant relationship between fiber content, unloading stiffness, and stress degradation rate. Based on the experimental results, a power function is used to fit the relationship between the standardized plastic stain and unloading strain. Simplified double line models for stress degradation rate, unloading and reloading curves are proposed. Finally, the stress-strain curve calculation equation for FAAC under cyclic loading is established. © 2025 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码:1049 / 1060
相关论文
共 50 条
  • [21] Effect of polypropylene fiber length on mechanical and thermal properties of autoclaved aerated concrete
    Pehlivanli, Zuhtu Onur
    Uzun, Ibrahim
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 322
  • [22] An experimental study of steel fiber-reinforced high-strength concrete slender columns under cyclic loading
    Caballero-Morrison, Karen E.
    Bonet, J. L.
    Navarro-Gregori, Juan
    Serna-Ros, Pedro
    ENGINEERING STRUCTURES, 2013, 57 : 565 - 577
  • [23] Dynamic Mechanical Properties of Steel Fiber-Reinforced Concrete Subjected to Shock Loading
    Jiang, Fang
    Tan, Yuesheng
    Zhao, Dong
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 703 - 708
  • [24] HYBRID FIBER-REINFORCED CONCRETE UNDER REPEATED LOADING
    KOMLOS, K
    BABAL, B
    NURNBERGEROVA, T
    NUCLEAR ENGINEERING AND DESIGN, 1995, 156 (1-2) : 195 - 200
  • [25] Experimental Study of the Mechanical Properties and Microstructure of Basalt Fiber-Reinforced Concrete
    Liu, Runqing
    Zhao, Shuo
    Sun, Sihui
    Cui, Yunpeng
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2023, 35 (07)
  • [26] An experimental study on mechanical properties of fiber-reinforced concrete of energy piles
    Zhao S.
    Chen L.
    Fu Y.
    Frattura ed Integrita Strutturale, 2017, 11 (41): : 412 - 423
  • [27] Behavior of high-strength fiber-reinforced concrete beams under cyclic loading
    Daniel, L
    Loukili, A
    ACI STRUCTURAL JOURNAL, 2002, 99 (03) : 248 - 256
  • [28] Experimental Investigation of the Physical and Mechanical Properties of Sisal Fiber-Reinforced Concrete
    Okeola, Abass Abayomi
    Abuodha, Silvester Ochieng
    Mwero, John
    FIBERS, 2018, 6 (03):
  • [29] Experimental Study on the Mechanical Properties of Amorphous Alloy Fiber-Reinforced Concrete
    Jiang, Chaohua
    Wang, Yizhi
    Guo, Wenwen
    Jin, Chen
    Wei, Min
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
  • [30] Experimental Research on Mechanical Properties and Compression Constitutive Relationship of PVA Fiber-Reinforced Coral Concrete
    Rao, Lan
    Wang, Ling
    Zheng, Yun
    MATERIALS, 2022, 15 (05)