Research on the evolution mechanism of the topological relationship of the property parameters of the mining overburden rock pressure relief gas migration channel

被引：0

作者：

Zhao P. ^{[1
,2
,3
,4
,5
,7
]}

Zhuo R. ^{[1
]}

Li S. ^{[1
,2
,3
]}

Lin H. ^{[1
,2
,3
]}

Chang Z. ^{[1
]}

Jia Y. ^{[6
]}

Jin Q. ^{[1
]}

Liu Y. ^{[7
]}

机构：

[1] College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an

[2] Key Laboratory of Western Mine Exploitation and Hazard Prevention Ministry of Education, Xi’an University of Science and Technology, Xi’an

[3] Western Engineering Research Center of Mine Gas Intelligent Extraction, Xi’an

[4] Xinjiang Key Laboratory of Coal Mine Disaster Intelligent Prevention and Emergency Response, Xinjiang Institute of Engineering, Urumqi

[5] Key Laboratory of Xiniiang Coal Resources Green Mining, Ministry of Education, Xinjiang Institute of Engineering, Urumqi

[6] Xinjiang Uygur Autonomous Region Institute of Coal Science, Urumqi

[7] Xinjiang Institute of Engineering, Urumqi

来源：

Meitan Kexue Jishu/Coal Science and Technology (Peking) | 2024年 / 52卷 / 02期

关键词：

attribute parameter; gas extraction; gas storge and migration channel; pressure relief gas; topological relations;

D O I：

10.12438/cst.2023-1784

中图分类号：

学科分类号：

摘要：

Many factors combine to influence the spatial distribution characteristics of overburden fracture during the increasingly intense mining process in coal mines. The characteristics of overburden fracture distribution has important significance in guiding the gas management in liberated layer mining. Several sets of two-dimensional physical similarity simulation experiments were carried out to investigated the distribution characteristics of overburden fracture network and the property parameters of the pressure relief gas storage and migration channels under different mining conditions (mining height, advancement speed, key layer upon layer and coal seam inclination). The topological network with geometric and fissure parameters was obtained. The topological transformation of the real stem system was simplified based on the theory of complex network evolution, and the evolution characteristics of the stem system structure and factor nodes of the transportation and storage channel was analyzed combined with the complex network characteristic parameters. The influencing factors of the overburden fissure network stem system was quantitatively described, and a matrix and model of the network structure of pressure relief gas transport and storage channel were established. The results indicated that, the development range, through degree, and fractal dimension of pressure relief gas migration and storge channel expand with the increase of mining height, key layer position, and coal seam dip angle. However, the development range shown a decreasing trend with the acceleration of advancing speed. The increase in mining height had the greatest impact on the amount of separation, with a 146.9% increase at 6 m mining height compared to 4 m. The variation in fracture density was mainly influenced by the dip angle of the coal seam, and was less influenced by the advancing speed. Arranging the boreholes in high-density areas (density > 4.7 pieces/m) can effectively act as a gas retention. The research results can further optimize the arrangement parameters of gas extraction boreholes under the influence of different factors, improve the efficiency of gas extraction, so as to ensure the safe and efficient recovery of the working face, which is of certain practical significance for the realization of accurate and green gas extraction. © 2024 China Coal Society. All rights reserved.

引用

页码：135 / 149

页数：14

共 48 条

[1] XU Jialin, QIN Wei, XUAN Dayang, Et al., Accumulative effect of overburden strata expansion induced by stress relief[J], Journal of China Coal Society, 45, 1, (2020)
[2] YANG Daming, GUO Wenbing, TAN Yi, Et al., Lithology and fissure characteristics of overburden in high-intensity mining[J], Journal of China Coal Society, 44, 3, pp. 786-795, (2019)
[3] HUANG Qingxiang, DU Junwu, HOU Enke, Et al., Research on overburden and ground surface cracks distribution and formation mechanism in shallow coal seams group mining[J], Journal of Mining & Safety Engineering, 36, 1, (2019)
[4] RAN Q C, LIANG Y P, ZOU Q L, Et al., Characteristics of mining-induced fractures under inclined coal seam group multiple mining and implications for gas migration[J], Natural Resources Research, 32, 3, (2023)
[5] HOU Enke, YUAN Feng, WANG Shuangming, Et al., Seismic identification and development characteristics of water conducting fissure zone in goaf[J], Journal of China Coal Society, 48, 1, (2023)
[6] YUAN Liang, ZHANG Tong, ZHANG Qinghe, Et al., Construction of green,low-carbon and multi-energy complementary system for abandoned mines under global carbon neutrality[J], Journal of China Coal Society, 47, 6, pp. 2131-2139, (2022)
[7] ZHOU Shining, Mechanisms of gas flow in coal seams[J], Journal of China Coal Society, 15, 1, (1990)
[8] TIEN J., Longwall caving in thick seams[J], Coal Age, 103, 4, (1998)
[9] JHA S N, KARMAKAR S., Thick seam mining-some experience and exaltation, Proceedings of the international symposium on thick seam mining, pp. 191-202, (1992)
[10] YASITLI N E, UNVER BAHTIYAR., 3D numerical modeling of longwall mining with top-coal caving[J], International Journal of Rock Mechanics and Mining Sciences, 42, 2, (2005)

← 1 2 3 4 5 →