Microstructure evolution in the weld metal region of a Ni-based Inconel 718 superalloy produced by tungsten inert gas welding

被引：0
作者：
叶欣 [1 ,2 ]
华学明 [1 ,2 ]
吴毅雄 [1 ,2 ]
楼松年 [1 ,2 ]
机构：
[1] Welding Engineering and Technical Institute,Materials Science and Engineering Department,Shanghai Jiao Tong University
[2] Shanghai Key Laboratory of Materials Laser Processing and
来源：
China Welding | 2015年 / 24卷 / 03期
关键词：
D O I：
暂无
中图分类号：
TG444.74 [];
学科分类号：
摘要：
The microstructure evolution of the weld metal(WM) region in a Ni-based 718 superalloy is discussed.The superalloy sheets were welded using the tungsten inert gas process at different heat inputs.The precipitates and dendrites in the WM of each joint were analyzed by optical microscopy,scanning electron microscopy,and energy dispersive spectroscopy(EDS).Statistics on the dendrite arm spacing and precipitates were obtained from the metallographs.Using the alloy composition determined by EDS and the phase diagram obtained using ThermoCalc,the equilibrium distribution coefficient of Nb,the temperature range of solid/liquid coexistence,and the distribution and morphology of Laves phase in different subregion of the WM were analyzed.There is lamellar segregation,regional segregation,and microsegregation in the WM.As the heat input increases,the arm spacing and the microsegregation increase.At a fixed heat input,the microsegregation rate is smallest in the crater,but with the macrosegregation seriously.
引用
收藏
页码：36 / 44
页数：9
相关论文
共 13 条
  • [1] Microsegregation and Rayleigh number variation during the solidification of superalloy Inconel 718.[J]..Journal of University of Science and Technology Beijing.2008, 05
  • [2] 二元合金非平衡凝固溶质分配的统计模型
    陈长乐
    陆福一
    [J]. 金属学报, 1997, (05) : 455 - 460
  • [3] Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone
    Manikandan, S. G. K.
    Sivakumar, D.
    Rao, K. Prasad
    Kamaraj, M.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (02) : 358 - 364
  • [4] Microstructural changes in a laser solid forming Inconel 718 superalloy thin wall in the deposition direction.[J].Fencheng Liu;Xin Lin;Han Leng;Jun Cao;Qiang Liu;Chunping Huang;Weidong Huang.Optics and Laser Technology.2013,
  • [5] Laves Phase Control in Inconel 718 Weldments.[J].Manikandan S.G.K.;Sivakumar D.;Kamaraj M;Rao K. Prasad.Materials Science Forum.2012, 710
  • [6] A Study on Laser Beam Welding (LBW) Technique: Effect of Heat Input on the Microstructural Evolution of Superalloy Inconel 718.[J]..Metallurgical and Materials Transactions A.2010, 9
  • [7] In situ TEM observation of γ′; γ″ and δ precipitations on Inconel 718 superalloy through HIP treatment.[J].Shih-Hsien Chang.Journal of Alloys and Compounds.2009, 1
  • [8] AN INVESTIGATION OF MICROSEGREGATION AND LIQUID DENSITY REDISTRIBUTION DURING SOLIDIFICATION OF INCONEL 718
    Wang, Ling
    Li, Chuanqi
    Dong, Jianxin
    Zhang, Maicang
    [J]. CHEMICAL ENGINEERING COMMUNICATIONS, 2009, 196 (06) : 754 - 765
  • [9] The effect of cooling rate on the solidification of INCONEL 718
    Antonsson, T
    Fredriksson, H
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2005, 36 (01): : 85 - 96
  • [10] Isolation and determination for δ, γ′ and γ" phases in Inconel 718 alloy
    Li, RB
    Yao, M
    Liu, WC
    He, XC
    [J]. SCRIPTA MATERIALIA, 2002, 46 (09) : 635 - 638
12