Numerical analysis of temperature profile and weld dimensions in laser+GMAW hybrid welding of aluminum alloy T-joint

被引：0
|
作者：
胥国祥 [1 ]
武传松 [2 ]
秦国梁 [2 ]
王旭友 [3 ]
机构：
[1] Key Laboratory of Advanced Welding Technology of Jiangsu Province,Jiangsu University of Science and Technology
[2] Institute for Materials Joining,Shandong University
[3] Harbin Welding
来源：
China Welding | 2013年 / 22卷 / 03期
关键词：
D O I：
暂无
中图分类号：
TG457.14 [铝];
学科分类号：
摘要：
The temperature fields in the transient state and weld dimensions in laser + gas metal arc welding(GMAW) hybrid welding of aluminum alloy T-jointfor different welding conditions were calculated using the developed heat source model,and the effect of welding speed on them was analyzed.The results show that the temperature field for the first weld pass only shows the feature of GMAW and the one for the second weld pass has the characteristics of both laser welding and GMAW.Welding speed can affect greatly weld dimensions and temperature distribution.When welding speed reaches 3.5 m/min,the fusion zones of two weld passes are separated and the maximum peak temperature of thermal cycle on the workpiece surface decreases largely.
引用
收藏
页码：51 / 55
页数：5
相关论文
共 50 条
  • [1] Numerical analysis of temperature profile and weld dimensions in laser+GMAW hybrid welding of aluminum alloy T-joint
    Xu, G. (xugxiang@163.com), 1600, China Welding, 111 Hexing Road, Harbin, 150080, China (22):
  • [2] Numerical analysis of welding residual stress and distortion in laser+GMAW hybrid welding of aluminum alloy T-joint
    Guoxiang Xu
    Chuansong Wu
    Xuezhou Ma
    Xuyou Wang
    Acta Metallurgica Sinica (English Letters), 2013, 26 : 352 - 360
  • [3] Numerical Analysis of Welding Residual Stress and Distortion in Laser+GMAW Hybrid Welding of Aluminum Alloy T-Joint
    Guoxiang XU
    Chuansong WU
    Xuezhou MA
    Xuyou WANG
    ActaMetallurgicaSinica(EnglishLetters), 2013, 26 (03) : 352 - 360
  • [4] Numerical Analysis of Welding Residual Stress and Distortion in Laser plus GMAW Hybrid Welding of Aluminum Alloy T-Joint
    Xu, Guoxiang
    Wu, Chuansong
    Ma, Xuezhou
    Wang, Xuyou
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2013, 26 (03) : 352 - 360
  • [5] FINITE ELEMENT ANALYSIS OF TEMPERATURE FIELD IN LASER plus GMAW HYBRID WELDING FOR T-JOINT OF ALUMINUM ALLOY
    Xu Guoxiang
    Wu Chuansong
    Qin Guoliang
    Wang Xuyou
    ACTA METALLURGICA SINICA, 2012, 48 (09) : 1033 - 1041
  • [6] Numerical investigation of weld bead porosity reduction in the oscillating laser T-joint welding of aluminum alloy
    Ai, Yuewei
    Cheng, Jian
    Yu, Long
    Lei, Chang
    Yuan, Pengcheng
    JOURNAL OF LASER APPLICATIONS, 2022, 34 (01)
  • [7] Numerical analysis model for fluid flow in laser+GMAW hybrid welding
    Xu, Guoxiang
    Zhang, Weiwei
    Ma, Xuezhou
    Du, Baoshuai
    Hanjie Xuebao/Transactions of the China Welding Institution, 2015, 36 (07): : 51 - 54
  • [8] Numerical Simulation and Experimental Analysis on Seam Feature Size and Deformation for T-Joint Laser-GMAW Hybrid Welding
    Wei, Nai-Kun
    Shi, Jin
    Yang, Run-Dang
    Xi, Jun-Tong
    Luo, Xiao-Meng
    Yin, Xu-Yue
    Zhang, Rui-Xue
    MATERIALS, 2024, 17 (01)
  • [9] Model for Numerical Simulation of Temperature Field and Bead Profile in Hybrid Laser-Arc Welding of T-Joint
    Ivanov, S.
    Valdaytseva, E.
    Udin, I
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING, ICIE 2019, VOL II, 2020, : 399 - 409
  • [10] Experimental and numerical investigations of hybrid laser arc welding of aluminum alloys in the thick T-joint configuration
    Atabaki, M. Mazar
    Nikodinovski, M.
    Chenier, P.
    Ma, J.
    Liu, W.
    Kovacevic, R.
    OPTICS AND LASER TECHNOLOGY, 2014, 59 : 68 - 92
12345