Processing and properties of novel reinforced polymer blends made of polymers and low-melting glass

被引：0

作者：

Haberstroh, Edmund ^{[1
]}

Prollius, Sven ^{[1
]}

机构：

[1] Institut for Polymer Processing, Aachen University, D-52062 Aachen

来源：

Journal of Polymer Engineering | 2004年 / 24卷 / 1-3 SPEC. ISS.期

关键词：

D O I：

10.1515/polyeng.2004.24.1-3.191

中图分类号：

学科分类号：

摘要：

The increasing requirements for technical polymers have resulted in the development of novel polymer blends where glass with low melting points substitutes glass fibers or spheres. These blends offer many commercial opportunities especially for high-end applications in electronic components. Typical material properties for polymer/glass blends are high stiffness and strength in combination with an excellent frictional behavior. The fact that the different components of these blends have extremely different viscosities results in special demands on the compounding process.

引用

页码：191 / 201

页数：10

共 6 条

[1]

Eckhardt H., Elektrisch Leitende Kunststoffe, (1989)

[2]

Knothe J.M., Elektrische Eigenschaften von Spritzgegossenen Kunststofformteilen aus Leitfähigen Compounds, (1996)

[3]

Michaeli W., Prollius S., Rationell verarbeitbare Hochleistungswerkstoffe auf der Basis von Thermoplasten und niedrigschmelzenden Gläsern für innovative Elektronikbauteile, Intermediate Report 2/1999 for the BMBF Project No. 03N1037A8, (1999)

[4]

Otaigbe J.U., Processability and properties of novel glass-polymer melt blends, Polymer Composites, 19, 1, (1998)

[5]

Greiner R., Rationell verarbeitbare Hochleistungswerkstoffe auf der Basis von Thermoplasten und niedrigschmelzenden Gläsern für innovative Elektronikbauteile, Intermediate Report 1/2000 for the BMBF Project No. 03N1037A8, (2000)

[6]

Grace H.P., Dispersion phenomena in high viscosity immiscible fluid systems and applications of static mixers as dispersion devices in such systems, Chem Eng Commun, 14, (1982)

← 1 →