EXPERIMENTAL STUDY ON HEAT TRANSFER BY GAS INJECTION IN THE PREHEATING ZONE OF A CONTINUOUS REHEATING FURNACE.

被引：0
|
作者：
Liu Renda [1 ]
Yang Shaojl [1 ]
机构：
[1] Chongqing Univ, China, Chongqing Univ, China
来源：
Kang T'ieh/Iron and Steel (Peking) | 1986年 / 21卷 / 12期
关键词：
ENERGY CONSERVATION - HEAT TRANSFER - Gases;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In order to recover the heat from low-temperature flue gas in the pusher-type reheating furnace, setting an injection device in the preheating zone was proposed to improve convection heat transfer. Good results have been obtained in the laboratory simulating hot injection. The mean heat flux and total heat transfer coefficient can be increased by 26% and 52-66%, respectively, under the following conditions: temperature in furnace at approximately 750-950 degree C, and temperature of injected gas at 370 degree C.
引用
收藏
页码：33 / 36
相关论文
共 50 条
  • [21] MATHEMATICAL MODEL OF HEAT TRANSFER IN THE ENCLOSURE OF A WALKING BEAM FURNACE.
    Nadziakiewicz, J.
    Rudnicki, Z.
    Gaswaerme International, 1981, 30 (05): : 265 - 269
  • [22] MONTE-CARLO METHOD FOR RADIATIVE HEAT TRANSFER IN A FURNACE.
    Sun, Zhao-xing
    Hu, Nai-yi
    1600, (04):
  • [23] INVESTIGATION OF SULPHUR TRANSFER VIA GAS PHASE IN A BLAST FURNACE.
    Tsuchiya, Nobuo
    Ohtani, Masayasu
    Okabe, Kyoji
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1973, 59 (01): : 33 - 45
  • [24] Utilization of flue gas heat of reheating furnace for steel rolling
    Jiangsu Consultation Cent of, Metallurgical Technology, Nanjing, China
    Kang T'ieh, 8 (63-65):
  • [25] INFLUENCE OF GAS INJECTION ON METAL QUALITY IN AN ALUMINIUM CHANNEL INDUCTION FURNACE.
    Smith, L.
    British Foundryman, 1976, 69 (pt 10): : 237 - 244
  • [26] COMPARATIVE TESTS OF PULSE AND CONTINUOUS HEATING IN A HEAT-TREATMENT FURNACE.
    Neimark, L.A.
    Grechishnikov, Ya.M.
    Enno, I.K.
    Miloserdov, A.V.
    Belov, M.L.
    Soviet Forging and Sheet Metal Stamping Technology (English Translation of Kuznechno-Shtampovochno, 1987, (05): : 51 - 55
  • [27] Temperature and heat transfer measurement in continuous reheating furnaces
    Honner, M
    Vesely, Z
    Svantner, M
    SCANDINAVIAN JOURNAL OF METALLURGY, 2003, 32 (05) : 225 - 232
  • [28] Investigation of Combustion and Heat Transfer in an Industrial Reheating Furnace Using CFD
    Chen, Yuchao
    Liu, Xiang
    Silaen, Armin K.
    Johnson, Kurt
    Zhou, Chenn Q.
    CFD MODELING AND SIMULATION IN MATERIALS PROCESSING 2018, 2018, : 187 - 198
  • [29] A CONVECTIVE HEAT-TRANSFER COEFFICIENT IN A HIGHLY CIRCULATING REHEATING FURNACE
    TOMECZEK, J
    KOMORNICKI, W
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1984, 27 (08) : 1149 - 1155
  • [30] Injection of a Mixture of Fuel and Charcoal Fines in the Blast Furnace. Experimental Results.
    Costa, Jurandir Diniz
    Rodrigues, Ronaldo
    Neto, Heitor Luz
    Metalurgia ABM, 1983, 39 (308): : 359 - 362
12345