EXAMINATION OF MECHANICAL TESTS FOR RESISTANCE SPOT WELDED LOW CARBON STEEL SHEET.

被引：0
|
作者：
Dinsdale, W.O.
Johnson, K.I.
机构：
来源：
Welding Research International | 1975年 / 5卷 / 01期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
An impact tensile-shear test has been developed for use on resistance spot welded sheet specimens. Test results have been compared with those obtained using conventional static tensile-shear and cross-tension tests on single spot welds in 1. 2mm mild steel sheet. A 55% reduction in weld diameter from the normally recommended value reduced the static tensile-shear strength by only 18%, while the estimated energy for failure was reduced by 81%. The implications of the results obtained are discussed and it is considered that further work must be conducted before spot welded assemblies can be used with confidence where impact conditions are met with in service. Refs.
引用
收藏
页码：91 / 105
相关论文
共 50 条
  • [31] Investigation of mechanical properties of high strength steel welded by resistance spot welding
    Aras, Sedat
    Ertan, Rukiye
    Guler Ozgul, Hande
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2018, 24 (01): : 63 - 68
  • [32] Improving the mechanical performance of a resistance spot welded 1200 MPa TBF steel
    Stadler, Manfred
    Schnitzer, Ronald
    Gruber, Martin
    Hofer, Christina
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2021, 112 (04) : 262 - 270
  • [33] The Spot Weldability of Carbon Steel Sheet
    Al-Mukhtar, A. M.
    Doos, Q.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2013, 2013
  • [34] Mechanical Property and Technological Investigations on Ultrasonically Roller Seam Welded Aluminum Sheet.
    Richter, Helmut
    Schweissen und Schneiden/Welding and Cutting, 1974, 26 (03): : 100 - 103
  • [35] Fracture behavior and numerical study of resistance spot welded joints in high strength steel sheet
    JFE Steel Corporation, Japan
    Yosetsu Gakkai Ronbunshu, 2 (64-72):
  • [36] SOLID STATE AND FUSION RESISTANCE SPOT WELDING OF TD-NiCr SHEET.
    Moore, T.J.
    Welding Journal (Miami, Fla), 1974, 53 (01):
  • [37] Effect of coating type on microstructure and mechanical behavior of resistance spot welds of thin X626 aluminum sheet to low carbon steel
    Shi, Liting
    Kang, Jidong
    Shalchi-Amirkhiz, Babak
    Sigler, David R.
    Haselhuhn, Amberlee S.
    Carlson, Blair E.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 264 : 438 - 447
  • [38] Numerical simulation of residual stress in a spot welded low carbon steel plate
    Varghese, Joy V. M.
    Sumanth, M. R.
    Suresh, M. R.
    INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 2913 - 2921
  • [39] Microstructures and Mechanical Properties of Steel/Aluminum Alloy Joints Welded by Resistance Spot Welding
    Yueying Zhang
    Daqian Sun
    Journal of Materials Engineering and Performance, 2017, 26 : 2649 - 2662
  • [40] Microstructures and Mechanical Properties of Steel/Aluminum Alloy Joints Welded by Resistance Spot Welding
    Zhang, Yueying
    Sun, Daqian
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (06) : 2649 - 2662
12345