FRACTURE CHARACTERISTICS EVALUATION BY CHARPY IMPACT BENDING TEST.

被引：0
|
作者：
Nunomura, Shigetomo
Nakashiro, Masashi
机构：
来源：
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan | 1978年 / 64卷 / 07期
关键词：
STEEL; -; Fracture;
D O I：
10.2355/tetsutohagane1955.64.7_860
中图分类号：
学科分类号：
摘要：
V-notched and fatigue pre-cracked low carbon steel specimens were tested from liquid nitrogen temperature to room temperature. Slow tensile tests and slow bending tests with Charpy-type specimens were also done in the same temperature range. Dynamic yield strength and microscopic fracture strength could be given by the instrumented v-notched Charpy test result.
引用
收藏
页码：860 / 869
相关论文
共 50 条
  • [41] Extended finite-element modelling of asphalt mixtures fracture properties using the semi-circular bending test
    Mahmoud, Enad
    Saadeh, Shadi
    Hakimelahi, Hamed
    Harvey, John
    ROAD MATERIALS AND PAVEMENT DESIGN, 2014, 15 (01) : 153 - 166
  • [42] The deformation and fracture behavior of 316L SS fabricated by SLM under mini V-bending test
    Kale, Amol B.
    Alluri, Preetham
    Singh, Abhishek K.
    Choi, Shi-Hoon
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 196 (196)
  • [43] Evaluation of synthetic composite tibias for fracture testing using impact loads
    Quenneville, C. E.
    Greeley, G. S.
    Dunning, C. E.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2010, 224 (H10) : 1195 - 1199
  • [44] Evaluation and modelling of low-temperature fracture properties of asphalt binders in thin film by means of the local fracture test
    Tozzi, Chiara
    Hammoum, Ferhat
    Baglieri, Orazio
    ROAD MATERIALS AND PAVEMENT DESIGN, 2024, 25 (02) : 375 - 391
  • [45] Significance of fracture toughness test results of beam welds in evaluation of brittle fracture performance of girth welded pipe joints
    Ohata, Mitsuru
    Toyoda, Masao
    Ishikawa, Nobuyuk
    Shinmiya, Toyohisa
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2007, 129 (04): : 609 - 618
  • [46] Tension-Compression Fatigue Test Evaluation Using Fracture Mechanics and Field Data
    Arambula, Edith
    Kutay, M. Emin
    ROAD MATERIALS AND PAVEMENT DESIGN, 2009, 10 (01) : 83 - 108
  • [47] Evaluation of susceptibility of high strength steels to delayed fracture by using cyclic corrosion test and slow strain rate test
    Li, Songjie
    Zhang, Zuogui
    Akiyama, Eiji
    Tsuzaki, Kaneaki
    Zhang, Boping
    CORROSION SCIENCE, 2010, 52 (05) : 1660 - 1667
  • [48] Fracture properties of asphalt mixtures using semi-circular bending test: A state-of-the-art review and future research
    Saha, Gourab
    Biligiri, Krishna Prapoorna
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 105 : 103 - 112
  • [49] Low-Temperature Deformation and Fracture of Cr-Mn-N Stainless Steel: Tensile and Impact Bending Tests
    Narkevich, Natalia
    Vlasov, Ilya
    Volochaev, Mikhail
    Gomorova, Yulia
    Mironov, Yury
    Panin, Sergey
    Berto, Filippo
    Maksimov, Pavel
    Deryugin, Evgeny
    METALS, 2023, 13 (01)
  • [50] Study on mode I dynamic fracture characteristics with a mini three-point bending specimen for the split Hopkinson bar technique
    Fan, Changzeng
    Xu, Zejian
    Han, Yang
    Wu, Gang
    Liu, Yan
    Huang, Fenglei
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2023, 179
12345