Rigid PVC Compounds for Injection Molding of Thin-Walled Parts.

被引：0
|
作者：
Szamborski, Eugene C.
Hansen, Kenneth E.
机构：
来源：
| 1600年 / 65期
关键词：
ACRYLICS - PLASTICS - Physical Properties - POLYMERS - Additives - RUBBER; SYNTHETIC;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Unplasticized PVC can be modified by adding stabilizers, lubricants, processing aids as well as components which increase its impact strength, so that thin section injection moldings can be economically produced. Additives based on acrylates, methacrylate/butadiene/styrene copolymers and acrylic rubbers impart properties to the finished articles which may be compared with those of ABS or CAB.
引用
收藏
相关论文
共 50 条
  • [1] Thermoforming of Thin-walled Parts.
    Neitzert, W.A.
    Plastverarbeiter, 1980, 22 (07): : 999 - 1002
  • [2] Material Development for Thin-walled Injection Molded Packaging Parts.
    Altendorfer, F.
    Geymayer, G.
    Plastverarbeiter, 1983, 34 (06): : 511 - 514
  • [3] INJECTION-COMPRESSION MOLDING OF THIN-WALLED THERMOPLASTIC PARTS
    FRIEDRICHS, B
    FRIESENBICHLER, W
    GISSING, K
    KUNSTSTOFFE-GERMAN PLASTICS, 1990, 80 (05): : 583 - 587
  • [4] Application of injection-compression molding to thin-walled polymeric parts
    Kwon, Young Il
    Song, Young Seok
    KOREA-AUSTRALIA RHEOLOGY JOURNAL, 2018, 30 (03) : 161 - 167
  • [5] Application of injection-compression molding to thin-walled polymeric parts
    Young Il Kwon
    Young Seok Song
    Korea-Australia Rheology Journal, 2018, 30 : 161 - 167
  • [6] The Research of Thin-walled Parts Collaborative Development based on Injection Molding Simulation
    Cheng Xiaomin
    Shen Naiyu
    THIRD 2008 INTERNATIONAL CONFERENCE ON CONVERGENCE AND HYBRID INFORMATION TECHNOLOGY, VOL 1, PROCEEDINGS, 2008, : 1109 - 1112
  • [7] Optimization of Process Parameters for Warpage Minimization on Injection Molding Thin-walled Parts
    Sun, Baoshou
    Deng, Yimin
    Gu, Boqin
    Huang, Xiaodiao
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION II, PTS 1 AND 2, 2012, 102-102 : 525 - +
  • [8] Study on residual stresses of thin-walled injection molding
    Wang, TH
    Young, WB
    EUROPEAN POLYMER JOURNAL, 2005, 41 (10) : 2511 - 2517
  • [9] Injection moulding of thin-walled precision moulding parts
    Keller, W.
    Plaste und Kautschuk, 1991, 38 (07):
  • [10] Optimization of processing parameters for minimizing warpage of large thin-walled parts in whole stages of injection molding
    Wen, Tong
    Chen, Xia
    Yang, Chen
    Liu, Lan-tao
    Hao, Liang
    CHINESE JOURNAL OF POLYMER SCIENCE, 2014, 32 (11) : 1535 - 1543
12345