Melting Behavior of Pelletized Batch for Glass Manufacture.

被引：0
作者：
Costa, Peter
机构：
来源：
Glastechnische Berichte | 1977年 / 50卷 / 01期
关键词：
D O I：
暂无
中图分类号：
TQ17 [硅酸盐工业];
学科分类号：
0805 ; 080502 ;
摘要：
The melting behavior of different sizes of pellets (5 to 15 mm) has been studied in a model tank furnace and compared with ordinary free-flowing batch. The glass was a typical commercial composition. In comparing metling behavior an attempt was made to operate with constant heat flux from both the combustion space and the melt. Melting behavior was studied by making temperature and conductivity measurements in the batch layer. It was shown that the optimum pellet size lay between 10 and 12. 5 mm diameter and this decreased batch-free time by 40% compared with normal batch.
引用
收藏
页码：10 / 18
相关论文
共 50 条
[21]   OXALIC ACID MANUFACTURE. [J].
Dube, Shiv Kumar ;
Vasudevan, Padma ;
Khandelwal, Bishan Lal .
Journal of chemical technology and biotechnology, 1982, 32 (10) :909-919
[22]   BATTERY CAN MANUFACTURE. [J].
Anon .
Sheet Metal Industries, 1988, 65 (06)
[23]   MOULD DESIGN AND MANUFACTURE. [J].
Rouse, Charles .
European Rubber Journal, 1982, 164 (08)
[24]   ALUMINUM CAN MANUFACTURE. [J].
Mastrovich, J.D. .
Lubrication, 1975, 61 :17-36
[25]   The Effect of Batch Quality on Glass Melting [J].
V. E. Manevich ;
K. Yu. Subbotin ;
A. G. Chesnokov .
Glass and Ceramics, 2004, 61 :6-8
[26]   The effect of batch quality on glass melting [J].
Manevich, VE ;
Subbotin, KY ;
Chesnokov, AG .
GLASS AND CERAMICS, 2004, 61 (1-2) :6-8
[27]   BATCH PREHEATING ON GLASS MELTING FURNACES [J].
BARKLAGEHILGEFORT, H .
GLASTECHNISCHE BERICHTE-GLASS SCIENCE AND TECHNOLOGY, 1989, 62 (04) :113-121
[28]   The influence of batch quality on glass melting [J].
Manevich, V.E. ;
Subbotin, K.Yu. ;
Chesnokov, A.G. .
Steklo i Keramika, 2004, (01) :6-8
[29]   A FURNACE FOR PHOTOGRAPHY OF MELTING GLASS BATCH [J].
BIELER, BH .
AMERICAN CERAMIC SOCIETY BULLETIN, 1985, 64 (11) :1476-1478
[30]   DEVELOPMENTS IN QUALITY IN PLASTICS MANUFACTURE. [J].
West, George .
Plastics and rubber international, 1988, 13 (03) :34-36
12345