Experimental investigation of biomass pyrolysis mechanism using cellulose as a model compound

被引:0
作者
Ueoka, Kenta [1 ]
Matsushita, Yohsuke [1 ]
Yamamoto, Tsuyoshi [1 ]
Aoki, Hideyuki [1 ]
Miura, Takatoshi [1 ]
机构
[1] Department of Chemical Engineering, Graduate School of Engineering, Tohoku University, Sendai-shi, Miyagi, 980-8579
来源
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B | 2004年 / 70卷 / 694期
关键词
Biomass Energy; Cellulose; Chemical Reaction; Gasification; Pyrolysis;
D O I
10.1299/kikaib.70.1598
中图分类号
学科分类号
摘要
The drive to reduce greenhouse emissions and the dependence on fossil fuels has produced considerable interest in the use of biomass energy. Gasification of biomass is given attention since the process is simple and clean. It is necessary for optimum designing of biomass gasifier to understand the behavior of pyrolysis and to couple pyrolysis reaction rates of biomass with CFD (Computational Fluid Dynamics). The purpose of this study is to know the behavior of biomass pyrolysis and to fomulate chemical reaction rates of pyrolysis products under the high heating rate (5 K/s). The major component of wood, cellulose, was pyrolyzed at temperature raging from 250 to 700°C. Cellulose was pyrolyzed at temperature raging from 250 to 700°C. Also, biomass pyrolysis was applied to a first-order Arrhenius type kinetic model. It was found that calculated value could reasonably represent the yields of gas, tar, water and main gas spices (CO and CO2). Therefore we could propose reaction rates of primary reaction, which predicted quantity of biomass pyrolysis products.
引用
收藏
页码:1598 / 1603
页数:5
相关论文
共 11 条
[1]  
Radlein D., Mason S.L., Piskorz J., Scott D.S., Hydrocarbons from the catalytic pyrolysis of biomass, Energy & Fuels, 5, pp. 760-763, (1991)
[2]  
Bradbury A.G.W., Sakai Y., Shafizadeh F., Kinetic-model for pyrolysis of cellulose, Journal of Applied Polymer Science, 23, pp. 3271-3280, (1979)
[3]  
De Jong W., Pirone A., Wojtowicz M.A., Pyrolysis of miscanthus giganteus and wood pellets: TG-FTIR analysis and reaction kinetics, Fuel, 82, pp. 1139-1147, (2003)
[4]  
Fisher T., Hajaligol M., Waymack B., Kellogg D., Pyrolysis behavior and kinetics of biomass derived materials, Journal of Analytical and Applied Pyrolysis, 62, pp. 331-349, (2002)
[5]  
Broido A., Weinstein M., Proceedings of the 3rd International Conference on Thermal Analysis, pp. 285-296, (1971)
[6]  
Agrawal R.K., Kinetics of reactions involved in pyrolysis of cellulose .2. The modified kilzer-broido model, Can. J. Chem. Eng., 66, pp. 413-418, (1988)
[7]  
Varhegyi G., Jakab E., Antal Jr. M.J., Is the broido-shafizadeh model for cellulose pyrolysis true?, Energy & Fuels, 8, pp. 1345-1352, (1994)
[8]  
Koufopanos C.A., Maschio G., Lucchesi A., Kinetic modeling of the pyrolysis of biomass and biomass components, Can. J. Chem. Eng., 67, pp. 75-84, (1989)
[9]  
Williams P.T., Besler S., The influence of temperature and heating rate on the slow pyrolysis of biomass, Renewable Energy, 7, pp. 233-250, (1996)
[10]  
Blasi C.D., Modeling and simulation of combustion processes of charring and non-charring solid fuels, Prog. Energy Combust. Sci., 19, pp. 71-104, (1993)