Research on the reaction synthesis of AlN-based ceramics with the addition of Y2O3

被引：0

作者：

Zheng, Yongting ^{[1
]}

Han, Jiecai ^{[1
]}

Du, Shanyi ^{[1
]}

机构：

[1] Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, China

来源：

Jinshu Xuebao/Acta Metallurgica Sinica | 2000年 / 36卷 / 02期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Compact AlN/Y2O3 ceramic was fabricated by combustion synthesis of Al particles in the ultra-high pressure nitrogen (1000 MPa). The SHS reaction procedure of the Al-N2-Y2O3 system is as follows: Al melts at 660 °C, volatilizes strongly at 1000 °C and rapidly reacts with N2 to form AlN , meanwhile a great deal of reaction heat is released out; When the temperature is up to 1760 °C, eutectic melt Al5Y3O12 form from Y2O3 and Al2O3, then liquid sintering occurrs. Liquid sintering at high temperature decreased the porosity of reaction zone and greatly improved relative density of products. However, high relative density made reaction ratio decrease and residual Al content increase in the products, because it was more difficult for N2 to penetrate to the reaction zone. With increasing of Y2O3 content in the original powder system, porosity of the products decreases, content of Al in the products increases, and the bending strength and fracture toughness are improved. In Al-N2-Y2O3 system, SHS-densification mainly occurrs along the combustion front.

引用

页码：207 / 211