Study of SiC/Si3N4 nanocomposites by using polycarbosilane as precursor

被引：0
|
作者：
Zhong, Renzhi [1 ]
Zhang, Changrui [1 ]
Zhou, Xingui [1 ]
Zhou, Anchen [1 ]
Chen, Yuanzhi [1 ]
机构：
[1] Natl Univ of Defense Technology, Changsha, China
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 1999年 / 16卷 / 04期
关键词：
Composite materials - Nanostructured materials - Synthesis (chemical);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A cost-effective SiC/Si3N4 nano composite was obtained by in-situ synthesis of precursor, using polycarbosilane as precursor. The results showed that the ambitious flexural strength and fracture toughness of this material has improved. The formation of this composite's microstructure and the mechanism of fracture were discussed at the same time. It is important to control the formation of SiC nano crystals and the growth of rod-like β-Si3N4 grain. The formation of the intragranular structure and the rod-like β-Si3N4 grains (aspect ratio more than 7.5 is the reason for the improvement properties.
引用
收藏
页码：13 / 16
相关论文
共 50 条
  • [31] Si3N4/SiCN nanocomposites:: Influence of SiC nanoprecipitates on the creep behaviour
    Besson, JL
    Mayne, M
    Bahloul-Hourlier, D
    Goursat, P
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (13) : 1893 - 1904
  • [32] Mechanical properties of gas pressure sintered Si3N4/SiC nanocomposites
    Rendtel, P
    Rendtel, A
    Hübner, H
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (12) : 2061 - 2070
  • [33] Oxidation Behavior and Effect of Oxidation on Strength of Si3N4/SiC Nanocomposites
    Hae-Won Kim
    Young-Hag Koh
    Hyoun-Ee Kim
    Journal of Materials Research, 2000, 15 : 1478 - 1482
  • [34] In situ preparation of Si3N4/SiC nanocomposites for cutting tools application
    Sajgalík, P
    Hnatko, M
    Lencés, Z
    Dusza, J
    Kasiarová, M
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2006, 3 (01) : 41 - 46
  • [35] Fabrication and mechanical properties of Si3N4/SiC/TiAgCu multilayered nanocomposites
    Seo, DW
    Lim, JK
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2004, 5 (03): : 281 - 286
  • [36] Oxidation behavior and effect of oxidation on strength of Si3N4/SiC nanocomposites
    Kim, HW
    Koh, YH
    Kim, HE
    JOURNAL OF MATERIALS RESEARCH, 2000, 15 (07) : 1478 - 1482
  • [37] Densification and mechanical properties of Si3N4/SiC nanocomposite using Si-nitrided Si3N4 powder
    Yang, JF
    Choa, YH
    Sekino, T
    Niihara, K
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1999, 18 (07) : 505 - 507
  • [38] Fabrication of Si3N4 and Si3N4/SiC composites by pressureless sintering using nitrate as sintering additives
    Kim, JY
    Iseki, T
    Yano, T
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1997, 105 (02) : 147 - 151
  • [39] Study on thermal shock in Si3N4/SiC platelets
    Universidade Federal do Rio Grande, do Norte, Natal, Brazil
    J Mater Sci Lett, 24 (2125-2127):
  • [40] Improved creep resistance of Si3N4/SiC nanocomposites fabricated from amorphous SC-C-N precursor powder
    Hirano, T
    Niihara, K
    Ohji, T
    Wakai, F
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (06) : 505 - 507
12345