MODEL FOR PRESSURE IN AN LMFBR DUCT DUE TO DISCHARGE OF GAS FROM A FAILED FUEL PIN.

被引：0
|
作者：
Srinivas, S.
Chopra, P.S.
机构：
来源：
Struct Anal of React Fuel Elem | 1977年 / D卷
关键词：
Nuclear fuels - NUCLEAR REACTORS; FAST; -; Failure;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper a simple model for obtaining the pressure on the duct wall due to discharge of fission gas from a fuel pin is developed. Plenum pressure, plenum temperature, type of gas, duct effective area of cross-section and area of opening are found to be important parameters. Plenum volume, length of duct, type of liquid, and undisturbed liquid pressure were found to have less influence on peak duct pressures. The pressure-time history obtained from this analysis can be used to obtain either the permanent deformation experienced by the duct or to assess the susceptibility of the duct to fracture.
引用
收藏
相关论文
共 50 条
  • [41] Model of a surface-wave discharge at atmospheric pressure with a fixed profile of the gas temperature
    Nikovski, M.
    Kiss'ovski, Zh
    Tatarova, E.
    19TH INTERNATIONAL SUMMER SCHOOL ON VACUUM, ELECTRON AND ION TECHNOLOGIES (VEIT2015), 2016, 700
  • [42] A fast method to predict the transient, subcritical gas discharge from a pressure vessel
    Fischer, Michael-David
    Boettcher, Konrad E. R.
    CHEMICAL ENGINEERING SCIENCE, 2022, 249
  • [43] Wool treatment in the gas flow from gliding discharge plasma at atmospheric pressure
    Department of Physical Electronics, Faculty of Science, T. G. Masaryk University, Kotlářská 2, 61137 Brno, Czech Republic
    不详
    Surf. Coat. Technol., 1-3 (1112-1115):
  • [44] Wool treatment in the gas flow from gliding discharge plasma at atmospheric pressure
    Janca, J
    Czernichowski, A
    SURFACE & COATINGS TECHNOLOGY, 1998, 98 (1-3): : 1112 - 1115
  • [45] On the role and the origin of the gas pressure gradient in the discharge of fine solids from hoppers
    Barletta, D
    Donsì, G
    Ferrari, G
    Poletto, M
    CHEMICAL ENGINEERING SCIENCE, 2003, 58 (23-24) : 5269 - 5278
  • [46] PRESSURE PULSES GENERATED BY GAS RELEASED FROM A BREACHED FUEL-ELEMENT
    WU, TS
    NUCLEAR SCIENCE AND ENGINEERING, 1979, 69 (02) : 319 - 325
  • [47] PRESSURE PULSES GENERATED BY GAS RELEASED FROM A BREACHED FUEL ELEMENT.
    Wu, Ting-Shu
    1600, (69):
  • [48] COOLANT VOIDING AND PRESSURE GENERATION DUE TO BOILING, FISSION GAS RELEASE, AND MOLTEN FUEL-COOLANT INTERACTION
    FAUSKE, HK
    CHAWLA, TC
    CRONENBE.AW
    MARCHATE.JF
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1970, 13 (02): : 656 - &
  • [49] Effect of powder properties on discharge characteristics of cohesive carbonaceous fuel powders from a top discharge blow tank at high pressure
    Xu Guiling
    Lu Ping
    Liang Cai
    Xu Pan
    Shen Liu
    Liu Daoyin
    Chen Xiaoping
    CHEMICAL ENGINEERING COMMUNICATIONS, 2018, 205 (11) : 1604 - 1621
  • [50] Experimental Verification of a Mathematical Model of a Computerized Decreasing Discharge Pressure Effusion Gas Density Analyzer
    Zhigulin, S. Yu.
    Iliasov, L. V.
    MEASUREMENT TECHNIQUES, 2020, 63 (03) : 235 - 241
12345