Microstructure and properties of joint of H62 brass soldered using tin-lead solder

被引：0
|
作者：
Pan, Hui [1 ]
Sun, Ji-sheng [1 ]
Liu, Xiao-fang [1 ]
机构：
[1] Inst of Aeronautical Materials, Beijing, China
来源：
Hangkong Cailiao Xuebao/Journal of Aeronautical Materials | 2000年 / 20卷 / 04期
关键词：
Eutectics - Mechanical properties - Microstructure - Soldered joints - Soldering alloys - Solid solutions;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The microstructure of joint of H62 brass soldered using HLSn60PbSbA solder and the influences of soldering time on microstructure and properties are studied in this paper. It is observed that the joint consists of lead base solid solution, lead-tin base eutectic, copper base solid solution, cellular and block-shaped chemical compounds. Some plate-shaped chemical compounds occurred when soldering time is up to 120 s. And it is found that these plate-shaped chemical compounds can be considered to be the main reason for the decrement of mechanical properties, where the mechanical properties of the joint with the shortest holding time are the best.
引用
收藏
页码：26 / 29
相关论文
共 50 条
  • [21] Detection of Solder Joint Failure Precursors on Tin-Lead and Lead-Free Assemblies using RF Impedance Analysis
    Kwon, Daeil
    Azarian, Michael H.
    Pecht, Michael
    2009 IEEE 59TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE, VOLS 1-4, 2009, : 663 - 667
  • [22] Friction and Wear Properties of H62 Brass Subjected to Laser Shock Peening
    Duan Haifeng
    Luo Kaiyu
    Lu Jinzhong
    ACTA OPTICA SINICA, 2018, 38 (10)
  • [23] Atmospheric corrosion of tin coatings on H62 brass and T2 copper in an urban environment
    Wang, Xuankai
    Xie, Yi
    Feng, Chao
    Ding, Zhimin
    Li, Dengke
    Zhou, Xiaobao
    Wu, Tangqing
    ENGINEERING FAILURE ANALYSIS, 2022, 141
  • [24] Characteristics of microstructure evolution of two-phase H62 brass alloy during continuous extrusion
    Li, Bing
    Lin, Zikai
    Peng, Cheng
    Wang, Xue
    Zhang, Jingfeng
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 1135 - 1140
  • [25] Microstructural Evolution and Shear Properties Degradation of Tin-Lead/Copper Solder Joints at Cryogenic Temperatures
    He, Hao
    Liu, Yufeng
    Chen, Yao
    Han, Lu
    He, Liang
    Liu, Jiahao
    Guo, Xiaotong
    Jiang, Chunxu
    2023 24TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2023,
  • [26] Friction stir brazing of 6061 aluminum alloy and H62 brass: Evaluation of microstructure, mechanical and fracture behavior
    Huang, Guoqiang
    Feng, Xiaomei
    Shen, Yifu
    Zheng, Qixian
    Zhao, Pengcheng
    MATERIALS & DESIGN, 2016, 99 : 403 - 411
  • [27] An investigation on microstructure and mechanical properties of H62 brass thin-sheet by fiber laser welding: Experiments and multi-scale simulations
    Tang, Wenmin
    Huang, Yongming
    Wang, Xianhuan
    Ming, Hua
    Liu, Zhiyuan
    Wang, Xuanguo
    OPTICS AND LASER TECHNOLOGY, 2024, 171
  • [28] Effects of La2O3 on Mechanical Properties and Corrosion Resistance of H62 Brass
    Xiangwei Wu
    Hong Luo
    Meng Sheng
    Huanchao Liu
    Zhen Xiao
    Haoran Geng
    JOM, 2017, 69 : 184 - 190
  • [29] STUDY OF THE EFFECT ON THE MECHANICAL STRENGTH OF SOLDERED JOINTS MADE TO BRASS OF THE PRESENCE OF ANTIMONY IN 40% TIN-60% LEAD SOLDER.
    Thwaites, C.J.
    McDowall, D.
    1600,
  • [30] Influence of silver addition and reflow cooling rate on microstructure and strength of tin-lead system solder ball bonding
    Noguchi, K
    Ikeda, M
    Shimizu, I
    Ohno, Y
    Nakamori, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2002, 66 (08) : 799 - 807
12345