HAZ CRACKING OF Al-Mg-Si ALLOYS.

被引：0
|
作者：
Tsujimoto, Kazushi
Sakaguchi, Akira
Kinoshita, Tsuneo
Tanaka, Kazuo
Sasabe, Seizi
机构：
来源：
| 1600年 / 21期
关键词：
D O I：
暂无
中图分类号：
TG4 [焊接、金属切割及金属粘接];
学科分类号：
080201 ; 080503 ;
摘要：
This study investigated the influence of chemical compositions on cracking and weldability using Al-5% Mg and Al-5% Si filler metals. EPMA reveals that low temperature eutectics are Mg//2Si when using Al-5% Mg filler metals and Mg//2Si-Si when using Al-5% Si filler metals. Provided these eutectics are melted by welding heat and then cracked in the cooling process, cracking sensitivity can be explained in terms of the eutectic temperature.
引用
收藏
相关论文
共 50 条
  • [1] HAZ CRACKING OF Al-Mg-Si ALLOYS.
    Tanaka, Kazuo
    Sasabe, Seiji
    Yoneda, Yoichiro
    R and D: Research and Development Kobe Steel Engineering Reports, 1984, 34 (02): : 73 - 76
  • [2] HEAT-AFFECTED ZONE CRACKING OF Al-Mg-Si ALLOYS.
    Gittos, N.F.
    Scott, M.H.
    Welding Journal (Miami, Fla), 1981, 60 (06):
  • [3] Thermodynamic Properties of Liquid Al-Mg-Si Alloys.
    Sebkova, Jitka
    Beranek, Miroslav
    Halamkova, Petra
    Kovove Materialy, 1979, 17 (02): : 137 - 143
  • [4] EFFECTS OF PB ON THE SUSTAINED LOAD CRACKING OF AL-MG-SI ALLOYS
    KIM, YS
    HOLROYD, NJH
    LEWANDOWSKI, JJ
    JOURNAL OF METALS, 1987, 39 (07): : A20 - A20
  • [5] HEAT-AFFECTED ZONE CRACKING OF AL-MG-SI ALLOYS
    GITTOS, NF
    SCOTT, MH
    WELDING JOURNAL, 1981, 60 (06) : S95 - S103
  • [6] HOMOGENIZATION HEAT TREATMENT AND HOT WORKABILITY OF THE INGOTS OF Al-Mg-Si ALLOYS.
    Kaneko, Junichi
    Sultan, Mohamed Mokhtar
    Horiuchi, Ryo
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1976, 67 (01): : 8 - 15
  • [7] Bonding in MgSi and Al-Mg-Si compounds relevant to Al-Mg-Si alloys
    Froseth, AG
    Hoier, R
    Derlet, PM
    Andersen, SJ
    Marioara, CD
    PHYSICAL REVIEW B, 2003, 67 (22):
  • [8] Stretchability in Al-Mg-Si alloys
    Yanagawa, Masahiro
    Abe, Mutsumi
    Ohie, Shojiro
    Keikinzoku/Journal of Japan Institute of Light Metals, 1996, 46 (01): : 33 - 38
  • [9] Microstructural Effects of Al-Mg-Si Alloys on Sustained Load Cracking and Strength
    Kim, Dae-Kyeom
    Nam, Sun-Woo
    Kim, Seong Chul
    Cho, Sung-Min
    Kim, Taek-Soo
    SCIENCE OF ADVANCED MATERIALS, 2017, 9 (12) : 2121 - 2125
  • [10] Influence of Heat Treatment and Structural Characteristics on Anodization Behavior of the Al-Mg and Al-Mg-Si Alloys.
    Fortina, Gianfranco
    Leoni, Massimo
    Alluminio, 1973, 42 (10): : 516 - 523
12345