Liquid and solid bonding strength of Cu/Fe interface in copper clad steel

被引：0
|
作者：
Yu, J.M. [1 ]
Fang, X.Y. [1 ]
Xiao, Y.Z. [1 ]
机构：
[1] Northeastern Univ., Shenyang 110006, China
来源：
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2000年 / 14卷 / 06期
关键词：
Binders - Copper - Steel - Strength of materials - Surface treatment - Thermal effects - Two phase flow;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper presents an investigation of copper clad steel wire produced by means of liquid and solid bonding method. The influences of process parameters, such as surface preparation method, preheating temperature, liquid copper temperature and bonding time, on bonding strength of Cu/Fe are systematically studied. The results show that the bonding strength in the interface hits the record of 95 MPa after the steel core is treated through preheating above the temperature of 400°C and applying surface welding supporting technology.
引用
收藏
页码：661 / 664
相关论文
共 50 条
  • [21] The Bonding Properties of Solid Steel to Liquid Aluminum
    张鹏
    JournalofWuhanUniversityofTechnology-MaterialsScience, 2005, (01) : 25 - 29
  • [22] The bonding properties of solid steel to liquid aluminum
    Zhang, P
    Du, YH
    Liu, HW
    Zeng, DB
    Ba, LM
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2005, 20 (01): : 25 - 29
  • [23] The bonding properties of solid steel to liquid aluminum
    Zhang Peng
    Du Yunhui
    Liu Hanwu
    Zeng Daben
    Ba Limin
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (1): : 25 - 29
  • [24] Semi-solid pressing bonding strength between steel and Cu-graphite composite
    Zhang, P
    Du, YH
    Liu, HW
    Zeng, DB
    Cui, JZ
    Ba, LM
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 (02) : 265 - 268
  • [25] Semi-solid Pressing Bonding Strength between Steel and Cu-graphite Composite
    Peng ZHANG
    Journal of Materials Science & Technology, 2005, (02) : 265 - 268
  • [26] Effect of surface nitridingtreatment in a steel plate on the interfacial bonding strength of the aluminum/steel clad sheets by the cold roll bonding process
    Wu, Bo
    Li, Long
    Xia, Chengdong
    Guo, Xiaofeng
    Zhou, Dejing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 682 : 270 - 278
  • [27] Effect of bonding interface on delamination behavior of drawn Cu/Al bar clad material
    Lee, Sangmok
    Lee, Min-Geun
    Lee, Sang-Pill
    Lee, Geun-Ahn
    Kim, Yong-Bae
    Lee, Jong-Sup
    Bae, Dong-Su
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 : S645 - S649
  • [28] Interface formation and bonding mechanisms of hot-rolled stainless steel clad plate
    B. X. Liu
    Q. An
    F. X. Yin
    S. Wang
    C. X. Chen
    Journal of Materials Science, 2019, 54 : 11357 - 11377
  • [29] Interface and performance of CLAM steel/aluminum clad tube prepared by explosive bonding method
    Guo, Xunzhong
    Wang, Hui
    Liu, Zhongli
    Wang, Liuan
    Ma, Fuye
    Tao, Jie
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (1-4): : 543 - 548
  • [30] Interface strength and structure of explosive welding stainless steel-aluminum clad
    Liu Hongwei
    Yu Jingbo
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 : 1803 - 1806
12345