Liquid and solid bonding strength of Cu/Fe interface in copper clad steel

被引:0
|
作者
Yu, J.M. [1 ]
Fang, X.Y. [1 ]
Xiao, Y.Z. [1 ]
机构
[1] Northeastern Univ., Shenyang 110006, China
来源
Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2000年 / 14卷 / 06期
关键词
Binders - Copper - Steel - Strength of materials - Surface treatment - Thermal effects - Two phase flow;
D O I
暂无
中图分类号
学科分类号
摘要
This paper presents an investigation of copper clad steel wire produced by means of liquid and solid bonding method. The influences of process parameters, such as surface preparation method, preheating temperature, liquid copper temperature and bonding time, on bonding strength of Cu/Fe are systematically studied. The results show that the bonding strength in the interface hits the record of 95 MPa after the steel core is treated through preheating above the temperature of 400°C and applying surface welding supporting technology.
引用
收藏
页码:661 / 664
相关论文
共 50 条
  • [2] BONDING STRENGTH AND MICROSTRUCTURE OF BONDING INTERFACE OF HOT ROLLED TITANIUM CLAD STEEL
    FUKUDA, T
    SEINO, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1989, 75 (07): : 1162 - 1169
  • [3] Evolution of bonding interface in solid-liquid cast-rolling bonding of Cu/Al clad strip
    Huang, Hua-gui
    Dong, Yi-kang
    Yan, Meng
    Du, Feng-shan
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (05) : 1019 - 1025
  • [4] CHARACTERISTICS OF BONDING INTERFACE AND STRENGTH OF HOT ROLLED STAINLESS CLAD STEEL
    FUKUDA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (02): : 254 - 261
  • [5] Bonding interface of titanium/steel clad plate by explosion
    Gao, Wenzhu
    Gu, Liang
    Sui, Yongzhong
    Ma, Dongkang
    Xiyou jinshu cailiao yu gongcheng, 1993, 22 (02): : 38 - 44
  • [6] Characterisation of steel/nickel bronze clad strips prepared by continuous solid/liquid bonding method
    Jie, Jinchuan
    Liu, Chengbin
    Wang, Shihang
    Dong, Bowen
    Liu, Shichao
    Li, Tingju
    MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (15) : 1840 - 1847
  • [7] Effect of Interface Morphology on Bonding Properties of Titanium Clad Steel Plate
    Liu, Jixiong
    Zhao, Aiming
    Jiang, Haitao
    Tangdi
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL I, 2012, : 287 - 290
  • [8] Investigation on interface bonding behaviour of thin aluminium clad steel strip
    Li, L.
    Gao, C.
    Chen, M. Y.
    Zhang, X. J.
    Zhou, D. J.
    Palkowski, H.
    MATERIALS RESEARCH INNOVATIONS, 2015, 19 : S50 - S55
  • [9] Interface properties of copper/aluminum/stainless steel clad materials
    Bae, Dong-Su
    Kim, Soon-Kook
    Lee, Sang-Pill
    Shibayama, Tamaki
    Bae, Dong-Hyun
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 1497 - +
  • [10] Effect of Annealing Temperature on the Interfacial Microstructure and Bonding Strength of Cu/Al Clad Sheets with a Stainless Steel Interlayer
    Gao, Haitao
    Gu, Hao
    Wang, Sai
    Xuan, Yanni
    Yu, Hailiang
    MATERIALS, 2022, 15 (06)