CONTACT LIFE AND RESIDUAL STRESSES OF HIGH-SPEED STEEL AFTER DIAMOND AND HEXANITE GRINDING.

被引：0
|
作者：
Ivanets, I.V. [1 ]
Manzhar, V.A. [1 ]
Chervatyuk, V.A. [1 ]
机构：
[1] Acad of Sciences of the Ukrainian, SSR, G. V. Karpenko, Physicomechanical Inst, Lvov, USSR, Acad of Sciences of the Ukrainian SSR, G. V. Karpenko Physicomechanical Inst, Lvov, USSR
来源：
Soviet materials science | 1984年 / 20卷 / 03期
关键词：
GRINDING WHEELS - Diamond - IRON AND STEEL ANALYSIS - Fatigue - IRON AND STEEL METALLOGRAPHY - Microstructure - METALS AND ALLOYS - Stresses - STEEL TESTING - Fracture;
D O I：
10.1007/BF00720931
中图分类号：
学科分类号：
摘要：
An investigation was made of contact fatigue and residual stresses of R6M5 steel after diamond grinding with AS4 100/80 wheels with B1, BP2, and BE binders, Hexanite grinding with Ga 100/80 wheels with B1 and BST binders, and electrocorundum grinding with a 24Al6SM1K7B wheel. Contact fatigue tests were made on an MKV-K. The residual stresses in the surface layers of the samples were measured by determination of the deformation by the strain measurement method after electrolytic etching of their semicylindrical surface. Use of synthetic diamonds and Hexanite as a cutting abrasive provides increased contact life compared with the use of an electrocorundum wheel.
引用
收藏
页码：306 / 308
相关论文
共 50 条
  • [21] Analysis of Measured and Predicted Residual Stresses Induced by Finish Cylindrical Grinding of High Speed Steel with CBN Wheel
    Sallem, Haifa
    Hamdi, Hedi
    15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO), 2015, 31 : 381 - 386
  • [22] High-speed constant-pressure grinding characteristics of PCD with diamond grinding wheel
    20162502513874
    (1) Mechanical and System Engineering, Kyoto Institute of Technology, Japan; (2) Nissan Motor Co., Ltd., Natushima, Yokosuka, Kanagawa; 237-8523, Japan; (3) A.L.M.T. Diamond Co., Ltd., Kuroishi, Koutaka, Kato, Hyogo; 679-0221, Japan, 1600, Aikoku Alpha; et al.; Japan Machine Tool Builders' Association (JMTBA); JTEKT; Okuma; The Japan Society of Mechanical Engineers (JSME) (Japan Society of Mechanical Engineers):
  • [23] SURFACE LAYER PROPERTIES OF LOW-ALLOY HIGH-SPEED STEEL AFTER GRINDING
    Jaworski, Jan
    Trzepiecinski, Tomasz
    ACTA MECHANICA ET AUTOMATICA, 2016, 10 (04) : 275 - 279
  • [24] THE EFFECT OF HOOP AND MATERIAL RESIDUAL-STRESSES ON THE FATIGUE LIFE OF HIGH-SPEED, ROLLING BEARINGS
    HARRIS, TA
    RAGEN, MA
    SPITZER, RF
    TRIBOLOGY TRANSACTIONS, 1992, 35 (01): : 194 - 198
  • [25] Modeling the Process of High-Speed Diamond Grinding of Super Hard Materials
    Ostroverh, Evgeny
    Romashov, Dmitry
    Fedorovich, Vladimir
    ADVANCED MANUFACTURING PROCESSES (INTERPARTNER-2019), 2020, : 254 - 263
  • [26] INCREASE IN PRODUCTIVITY OF PROCESS OF ELECTRO DIAMOND GRINDING OF HIGH-SPEED STEELS
    Rakhimyanov, K. M.
    Krasilnikov, B. A.
    Yanpolskiy, V. V.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2006, (04): : 7 - 8
  • [27] TOOL LIFE OF HIGH-SPEED STEEL CUTTERS AFTER COLD TREATMENT
    TSEITLIN, LB
    KOLESNICHENKO, VD
    KARNAUSHENKO, TV
    UMANETS, VV
    ZHMUD, ES
    METAL SCIENCE AND HEAT TREATMENT, 1980, 22 (9-10) : 706 - 708
  • [28] Tribological characteristics in high-speed grinding of alumina with brazed diamond wheels
    Jianyi Chen
    Xipeng Xu
    The International Journal of Advanced Manufacturing Technology, 2014, 71 : 1579 - 1585
  • [29] Tribological characteristics in high-speed grinding of alumina with brazed diamond wheels
    Chen, Jianyi
    Xu, Xipeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 71 (9-12): : 1579 - 1585
  • [30] Temperature Measurement and Simulation in Stainless Steel High-speed Grinding
    Yi, Jun
    Sheng, Xiaomin
    Feng, Cangbo
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 684 - +
12345