CONTACT LIFE AND RESIDUAL STRESSES OF HIGH-SPEED STEEL AFTER DIAMOND AND HEXANITE GRINDING.

被引：0

作者：

Ivanets, I.V. ^{[1
]}

Manzhar, V.A. ^{[1
]}

Chervatyuk, V.A. ^{[1
]}

机构：

[1] Acad of Sciences of the Ukrainian, SSR, G. V. Karpenko, Physicomechanical Inst, Lvov, USSR, Acad of Sciences of the Ukrainian SSR, G. V. Karpenko Physicomechanical Inst, Lvov, USSR

来源：

Soviet materials science | 1984年 / 20卷 / 03期

关键词：

GRINDING WHEELS - Diamond - IRON AND STEEL ANALYSIS - Fatigue - IRON AND STEEL METALLOGRAPHY - Microstructure - METALS AND ALLOYS - Stresses - STEEL TESTING - Fracture;

D O I：

10.1007/BF00720931

中图分类号：

学科分类号：

摘要：

An investigation was made of contact fatigue and residual stresses of R6M5 steel after diamond grinding with AS4 100/80 wheels with B1, BP2, and BE binders, Hexanite grinding with Ga 100/80 wheels with B1 and BST binders, and electrocorundum grinding with a 24Al6SM1K7B wheel. Contact fatigue tests were made on an MKV-K. The residual stresses in the surface layers of the samples were measured by determination of the deformation by the strain measurement method after electrolytic etching of their semicylindrical surface. Use of synthetic diamonds and Hexanite as a cutting abrasive provides increased contact life compared with the use of an electrocorundum wheel.

引用

页码：306 / 308

共 50 条

[1] WEAR RESISTANCE AND CONTACT SERVICE LIFE OF STEEL AFTER DIAMOND AND HEXANITE GRINDING.
Ivanets, V.I.
Manzhar, V.A.
Kozub, V.V.
Soviet Journal of Friction and Wear (English translation of Trenie i Iznos), 1984, 5 (06): : 127 - 129
[2] High-Speed Groove Grinding.
Schmidt, H.
Werkstatt und Betrieb, 1975, 108 (12): : 812 - 814
[3] THE RESIDUAL-STRESSES IN HIGH-SPEED GRINDING OF STEEL 4KHGNM
NIKOLAEV, SV
MALYSHEV, VI
SOVIET ENGINEERING RESEARCH, 1984, 4 (01): : 40 - 41
[4] MODIFYING CYLINDRICAL GRINDING MACHINES FOR HIGH-SPEED GRINDING.
Breev, B.T.
Machines & tooling Melton Mowbray, 1980, 51 (08): : 12 - 14
[5] PURIFICATION OF CUTTING FLUID DURING HIGH-SPEED GRINDING.
Paikin, Ts.Kh.
Sitov, V.O.
1600, (43):
[6] Effects of Cutting Oil in Normal and High-Speed Grinding.
Voeller, Rolf
Schmiertechnik, Tribologie, 1974, 21 (04): : 75 - 79
[7] The Study of the Surface Quality of High-Speed Steel Tool after the Combined Electric Diamond Grinding
Popov, Vyacheslav
Rychkov, Daniil
Arkhipov, Pavel
Kuznetsov, Alexey
Losev, Egor
Selin, Nikolay
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2019, 21 (01): : 6 - 15
[8] Phase transformation in high-speed cylindrical grinding of SiC and its effects on residual stresses
Ni, Jiaming
Li, Beizhi
MATERIALS LETTERS, 2012, 89 : 150 - 152
[9] Lowering the Temperature in Grinding High-Speed Steel
Panaioti V.A.
Meshkov V.V.
Kurnasov E.V.
Russian Engineering Research, 2020, 40 (4) : 308 - 312
[10] HIGH-SPEED GRINDING AT COPPERWELD-STEEL
HOFFMAN, JD
IRON AND STEEL ENGINEER, 1983, 60 (05): : 29 - 31

← 1 2 3 4 5 →