COLD ROLLING AND RECRYSTALLIZATION TEXTURES OF HIGH-PURITY IRON.

被引：0

作者：

Nakamura, Takayuki

Fukutsuka, Toshiro

Yagi, Yoshiro

机构：

来源：

Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan | 1972年 / 58卷 / 14期

关键词：

IRON AND ALLOYS;

D O I：

10.2355/tetsutohagane1955.58.14_2025

中图分类号：

学科分类号：

摘要：

Zone melted iron specimens with different grain sizes (40 vs 270 mu ) were hot forged and hot rolled into 2 mm sheet, which was then further reduced to 0. 5 mm thickness by cold rolling 75%. This was followed by isothermal salt bath annealing at 500 or 575 C. The effect of grain boundaries on cold rolling and recrystallization textures was determined by x-ray pole figure measurements and optical and electron microscopy.

引用

页码：2025 / 2033

共 50 条

[1] DEVELOPMENT OF ROLLING AND RECRYSTALLIZATION TEXTURES IN HIGH-PURITY AL
HELLER, H
SLAKHORST, J
VERBRAAK, T
ZEITSCHRIFT FUR METALLKUNDE, 1977, 68 (01): : 31 - 37
[2] CROSS-ROLLING AND ANNEALING TEXTURES IN HIGH-PURITY IRON
HU, H
TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1957, 209 : 1164 - 1168
[3] Rolling and recrystallization textures in high purity Al cold rolled to very high rolling reductions
Todayama, A
Inagaki, H
ICOTOM 14: TEXTURES OF MATERIALS, PTS 1AND 2, 2005, 495-497 : 603 - 608
[4] ON AN EFFECT OF SILICON ON RECRYSTALLIZATION TEXTURES IN COLD-ROLLED HIGH-PURITY IRON-SILICON ALLOYS
DUNN, CG
TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1963, 227 (04): : 1011 - &
[5] RECRYSTALLIZATION OF HIGH-PURITY IRON
ROSEN, A
BURTON, MS
SMITH, GV
TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1964, 230 (01): : 205 - &
[6] EFFECT OF COARSE CEMENTITE PARTICLES ON THE DEVELOPMENT OF RECRYSTALLIZATION TEXTURES IN HIGH-PURITY IRON
INAGAKI, H
ZEITSCHRIFT FUR METALLKUNDE, 1991, 82 (02): : 99 - 107
[7] Rolling Texture of High Purity Iron.
Oesterle, W.
Bluemel, G.
Wever, H.
Materialpruefung/Materials Testing, 1977, 19 (08): : 347 - 350
[8] A COMMENT ON THE COLD-ROLLING TEXTURES OF HIGH-PURITY BCC POLYCRYSTAL METALS
OHBA, Y
FUJII, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1980, 44 (10) : 1200 - 1201
[9] Development of cube recrystallization textures in high-purity Al
Umezawa, A
Inagaki, H
ZEITSCHRIFT FUR METALLKUNDE, 2006, 97 (01): : 39 - 48
[10] Development of cube recrystallization textures in high-purity Al
Department of Mechanical Engineering, Shonan Institute of Technology, Fujisawashi, Japan
不详
Int. J. Mater. Res., 2006, 1 (39-48):

← 1 2 3 4 5 →