ESTIMATING METHOD OF REDUCTION OF WELDING RESIDUAL STRESS OF VERY THICK JOINTS DURING SR-TREATMENT - AN ESTIMATING METHOD OF REDUCTION OF WELDING RESIDUAL STRESSES FROM STRESS RELIEF ANNEALING (2ND REPORT).

被引：0

作者：

Nakacho, Keiji ^{[1
]}

Ueda, Yukio ^{[1
]}

机构：

[1] Osaka Univ, Jpn, Osaka Univ, Jpn

来源：

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 1988年 / 6卷 / 01期

关键词：

STRESS RELIEF ANNEALING - THERMAL-ELASTIC-PLASTIC-CREEP ANALYSIS - THICK WELDED JOINTS - WELDING RESIDUAL STRESSES;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

(Edited Abstract)

引用

页码：151 / 158

共 17 条

[1] Simple estimating method for reduction of welding residual stresses in thick welded joint from stress-relief annealing - Part II: The characteristics of reduction of welding residual stresses in very thick joints during SR treatment
Osaka Univ, Osaka, Japan
J Pressure Vessel Technol Trans ASME, 1 (11-16):
[2] A simple estimating method for reduction of welding residual stresses in thick welded joint from stress-relief annealing - Part II: The characteristics of reduction of welding residual stresses in very thick joints during SR treatment
Nakacho, K
Ueda, Y
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1999, 121 (01): : 11 - 16
[3] A simple estimating method for reduction of welding residual stresses in thick welded joint from stress-relief annealing - Part IV: Applicability of the simple estimating method for stress-relief annealing of thick welded joint
Nakacho, K
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2002, 124 (02): : 207 - 214
[4] EFFICIENT METHOD FOR ESTIMATION OF REDUCTION OF WELDING RESIDUAL STRESSES FROM STRESS-RELIEF ANNEALING (REPORT I).
Nakacho, Keiji
Ueda, Yukio
Transactions of J W R I, 1987, 16 (02): : 131 - 138
[5] A simple estimating method for reduction of welding residual stresses in thick welded joint from stress-relief annealing - Part III: Development of estimating equations for multiaxial stress state in thick welded joint
Nakacho, K
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2002, 124 (01): : 14 - 21
[6] A simple estimating method for reduction of welding residual stresses in thick welded joint from stress-relief annealing .1. Development of the analytical method for relaxation tests and its applicability
Nakacho, K
Ueda, Y
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (03): : 343 - 350
[7] Simple estimating method for reduction of welding residual stresses in thick welded joint from stress-relief annealing - Part I: development of the analytical method for relaxation tests and its applicability
Osaka Univ, Osaka, Japan
J Pressure Vessel Technol Trans ASME, 3 (343-350):
[8] Mechanical behavior during SR-treatment of welding residual stress through the thickness
Kim, You Chul, 1600, (19):
[9] Efficient method for estimation of reduction of welding residual stresses from stress-relief annealing (Report III) - development of estimation equations for multi-axial stress state in thick welded joint
Weld Res Abroad, 3 (2-9):
[10] Prediction of welding residual stresses in T and I-joints using inherent strains. A predicting method of welding residual stress using source of residual stress (Report 3)
Ueda, Yukio, 1600, (09):

← 1 2 →