Development of technology for producing the heat-resistant alloy of EI 698 grade by duplex-process

被引：0
作者：
Tkach, O.N.
Levin, B.A.
Byalik, G.A.
Ustin, K.P.
Yatsenko, M.Yu.
机构：
来源：
Metallurgicheskaya i Gornorudnaya Promyshlennost | 2003年 / 05期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：25 / 26
相关论文
共 48 条
[41]   Microstructural development and aging behavior of Al-Cr-Zr heat-resistant alloy fabricated using laser powder bed fusion [J].
Kimura, Takahiro ;
Nakamoto, Takayuki ;
Ozaki, Tomoatsu ;
Miki, Takao ;
Murakami, Isao ;
Hashizume, Yoshiki ;
Tanaka, Akiei .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 :4193-4207
[42]   Development of Simultaneous Corrosion Barrier and Optimized Microstructure in FeCrAl Heat-Resistant Alloy for Energy Applications. Part 1: The Protective Scale [J].
Pimentel, G. ;
Aranda, M. M. ;
Chao, J. ;
Gonzalez-Carrasco, J. L. ;
Capdevila, C. .
JOM, 2015, 67 (09) :2047-2054
[43]   Development of Simultaneous Corrosion Barrier and Optimized Microstructure in FeCrAl Heat-Resistant Alloy for Energy Applications. Part 1: The Protective Scale [J].
G. Pimentel ;
M. M. Aranda ;
J. Chao ;
J. L. González-Carrasco ;
C. Capdevila .
JOM, 2015, 67 :2047-2054
[44]   Development of heat-resistant Fe-based alloys for A-USC steam boiler using ultra-high purity (UHP) technology [J].
Hamdani, Fethi ;
Shoji, Tetsuo .
CORROSION SCIENCE, 2018, 144 :89-96
[45]   Porosity forming mechanism and numerical simulation of casting process optimization of nickel-based heat-resistant alloy electrode ingot with large height to diameter ratio [J].
Chen, Kun ;
He, Xikou ;
Liu, Zhengdong ;
Li, Gen ;
Zhang, Peng ;
Liu, Huasong .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 :2363-2375
[46]   DEVELOPMENT OF HEAT RESISTANT Pb-FREE JOINTS BY TLPS PROCESS OF Ag AND Sn-Bi-Ag ALLOY POWDERS [J].
Ohnuma, I. ;
Kainuma, R. ;
Ishida, K. .
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2012, 48 (03) :413-418
[47]   Effect of RE addition on solidification process and high-temperature strength of Al-12%Si-4%Cu-1.6%Mn heat-resistant alloy [J].
Liao, Heng-cheng ;
Xu, He-ting ;
Hu, Yi-yun .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (06) :1117-1126
[48]   Comparative Study of the Structure and Mechanical Properties of PM HIP Compacts Manufactured Using Rapidly Quenched PREP Powder and a Product Made Using Traditional Technology from a Heat-Resistant Titanium-Based Alloy [J].
Shulga, A. V. .
PHYSICS OF ATOMIC NUCLEI, 2024, 87 (12) :1777-1788
12345