DIFFUSION INTERACTION OF CARBIDE Cr3C2 WITH IRON AND STEEL.

被引：0

作者：

Popov, V.V. ^{[1
]}

Antsiferov, V.N. ^{[1
]}

Gol'dshteyn, M.I. ^{[1
]}

Yemel'yanov, D.A. ^{[1
]}

Ivenko, N.V. ^{[1
]}

机构：

[1] Urals Polytechnical Inst, USSR, Urals Polytechnical Inst, USSR

来源：

Physics of Metals and Metallography | 1987年 / 60卷 / 02期

关键词：

CARBIDES - Diffusion - IRON AND STEEL METALLOGRAPHY - Microstructures - STEEL HEAT TREATMENT - Annealing - X-RAY ANALYSIS;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

X-ray microstructural analysis and metallography were used to study the diffusion interaction of chromium carbide Cr//3C//2 with iron and steel with 0. 1-0. 5% C at temperature 1200 degree C. The phase composition and microstructure of the diffusion zone were studied after annealing. Concentration distributions of the elements in the diffusion zone were obtained and the mutual diffusion coefficients in the existing phases were determined. The influence of carbon content on the kinetics of the diffusion interaction is analysed.

引用

页码：104 / 108

共 50 条

[21] Lifetime in Steel Cord Wire Drawing Dies of WC-Co Cemented Carbide Containing TaNbC or Cr3C2
Takada, Masayuki
Matsubara, Hideaki
Kawagishi, Yoshihiro
MATERIALS TRANSACTIONS, 2018, 59 (05) : 754 - 759
[22] Analysis of nucleation of carbide (Cr, Fe)7C3 in the Cr3C2/Fe-CrNiBSi composite coating
Yuan, Youlu
Li, Zhuguo
SURFACE & COATINGS TECHNOLOGY, 2013, 228 : 41 - 47
[23] Computer simulation of the phase transformations of Cr3C2 in contact with iron in heating
Gordienko, SP
Maslyuk, VA
POWDER METALLURGY AND METAL CERAMICS, 1996, 35 (1-2) : 62 - 65
[24] Effect of Cr3C2 Content on the Microstructure and Wear Resistance of Fe3Al/Cr3C2 Composites
Feng, Yingkai
Shan, Jiguo
Zhao, Lin
Liu, Zhenbo
Gong, Karin
Li, Changhai
COATINGS, 2022, 12 (12)
[25] Low temperature synthesis of chromium carbide (Cr3C2) nanopowders by a novel precursor method
Zhao, Zhiwei
Zheng, Hongjuan
Liu, Shaojing
Shen, Jianhong
Song, Weiqiang
Chen, Jinshen
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 46 - 50
[26] MORPHOLOGY, COMPOSITION AND DIFFUSION OF CATIONS IN SCALE ON Fe-Cr-C STEEL.
Hajduga, Maciej
Kucera, Jaroslav
Metallic Materials (English translation of Kovove Materialy) (Cambridge, Engl), 1986, 24 (06): : 326 - 331
[27] Structure refinement and properties of Cr3C2
Glaser, J
Schmitt, R
Meyer, HJ
ZEITSCHRIFT FUR NATURFORSCHUNG SECTION B-A JOURNAL OF CHEMICAL SCIENCES, 2003, 58 (10): : 929 - 933
[28] Synthesis of Cr3C2 by SHS process
Rapidly Solidified Materials, Research Cent Chungnam Natl Univ, Daejon, Korea, Republic of
Scripta Mater, 6 (889-895):
[29] Thermodynamic models of the chemical interaction 18% Cr - 15% Ni steel with Cr3C2, MoS2 and graphite while heating in hydrogen
Gordienko, S.P.
Napara-Volgina, S.G.
Poroshkovaya Metallurgiya, 2000, (1-2): : 67 - 71
[30] DISCUSSION OF THE EUTECTIC CARBIDE AND MICROCRACKS IN Cr12 STEEL.
Li, Yi-lian
Li, Yu-tong
Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology, 1985, (01): : 97 - 101

← 1 2 3 4 5 →