PERFORMANCE OF SEMI-TRANSPORTATION-COOLED LINER IN HIGH-TEMPERATURE-RISE COMBUSTOR.

被引：0
|
作者：
Wear, Jerrold D.
Trout, Arthur M.
Smith, John M.
机构：
来源：
NASA Technical Paper | 1981年 / 1806期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A combustor liner fabricated from Lamilloy was tested at inlet air pressures to 8 atmospheres, an inlet air temperature of 894 K, and exhaust gas temperatures to 2430 K. Results obtained with the Lamilloy liner are compared with results obtained with a conventionally designed, film-cooled step-louver liner. Operation of the Lamilloy liner with counterrotating swirl combustor fuel modules with mixing venturis was possible to a fuel-air ratio of 0. 065 without obtaining excessive liner metal temperatures. At the 0. 065 fuel-air condition the average liner metal temperature was 140 kelvins and the maximum local temperature 280 kelvins above the inlet air temperature. Combustion efficiency, pattern factor, and smoke data are included.
引用
收藏
相关论文
共 50 条
  • [21] Design and simulation of high temperature rise triple-swirler combustor
    Wang, D.
    Li, F.
    Lin, H.
    Tan, Y.
    Wang, K.
    Wang, D.
    Zhao, Y.
    Zhao, K.
    Zhou, T.
    AERONAUTICAL JOURNAL, 2024,
  • [22] Design and simulation of high temperature rise triple-swirler combustor
    Wang, D.
    Li, F.
    Lin, H.
    Tan, Y.
    Wang, K.
    Zhao, Y.
    Zhao, K.
    Zhou, T.
    Aeronautical Journal, 2024,
  • [23] The design and performance of a RP-3 fueled high temperature rise combustor based on RQL staged combustion
    Li, Jianzhong
    Chen, Jian
    Jin, Wu
    Yuan, Li
    Hu, Ge
    ENERGY, 2020, 209 (209)
  • [24] Effect of Primary Holes Structure on Flow Characteristic and Combustion Performance of High Temperature Rise Combustor Based on RQL
    Jian Chen
    Jianzhong Li
    Qingqing Dong
    Jiutian Xue
    Ge Hu
    International Journal of Aeronautical and Space Sciences, 2023, 24 : 606 - 617
  • [25] Effect of Primary Holes Structure on Flow Characteristic and Combustion Performance of High Temperature Rise Combustor Based on RQL
    Chen, Jian
    Li, Jianzhong
    Dong, Qingqing
    Xue, Jiutian
    Hu, Ge
    INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, 2023, 24 (03) : 606 - 617
  • [26] Research on the lean blow-out stabilities of the high temperature rise combustor
    Liu, Bai-Lin
    Lin, Yu-Zhen
    Yuan, Yi-Xiang
    Liu, Gao-En
    Hu, Zheng-Yi
    Xu, Hua-Sheng
    Tuijin Jishu/Journal of Propulsion Technology, 2003, 24 (05): : 456 - 459
  • [27] Dome structure modification of a high temperature rise combustor based on CFD simulation
    Inst. of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China
    不详
    Tuijin Jishu, 2009, 5 (533-537):
  • [28] Study on the Dynamic Combustion Characteristics of a Staged High-Temperature Rise Combustor
    Li, Meng
    Yang, Jinhu
    Liu, Cunxi
    Liu, Fuqiang
    Wang, Kaixing
    Ruan, Changlong
    Mu, Yong
    Xu, Gang
    ENERGIES, 2025, 18 (03)
  • [29] STRUCTURE DESIGN AND PERFORMANCE TEST OF A HIGH TEMPERATURE RISE COMBUSTOR BASED ON COMBUSTION-GAS WIND TUNNEL DEVICE
    Lou, Fengfei
    Dong, Sujun
    Zhao, Banghua
    Qi, Bin
    HEAT TRANSFER RESEARCH, 2022, 53 (13) : 21 - 36
  • [30] High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines
    Ray, A. K.
    Roy, N.
    Dash, B.
    Das, D. K.
    Ranganath, V. R.
    Goswami, B.
    Singh, M. P.
    Tiwari, Y. N.
    Roy, P. K.
    Das, H. K.
    Sanyal, D.
    Dwarakadasa, E. S.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2006, 25 (03) : 109 - 119
12345